Attero Tech 4-Channel Line Level Output Dante/AES67 Interface, PoE

The Attero Tech unD4O Dante interface is a 4 output, cost-effective way to add up to four analog output channels to an existing Dante-based networked audio system. The unD4O's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio sink - thereby eliminating costly and interference prone analog wiring. The unD4O is powered by either external +24VDC or any PoE network switch.

Applications:

• Addition of analog outputs where analog cabling would be expensive or is not available back to a central rack
• Network enable analog input power amplifiers or powered speakers
• Analog outputs from Dante-only microphones, like the Shure MicroFlex Series Wireless, or the Audio Technica ATND971 boundary microphone or ATND8677 microphone desk stand
• Multi-point network audio distribution
  
  

With the latest firmware release (v4.5.0), all unD4O units utilizing the UltimoX chip now support AES67 networked audio. AES67 can be enabled within Dante Controller.

• Supports DDM (Dante Domain Manager)
• Supports AES67 interoperability mode
• Small form factor, can be unobtrusively located near analog input devices in systems with Dante audio infrastructure
• 4 balanced line-level analog outputs driven from 4 Dante channels within up to 2 different Dante audio flows
• Maximum output level of +20dBu (+20 dBu = 0dBFS in the digital domain)
• Power, Sys, Error, and Sync LEDs on the front panel for easy network troubleshooting
• PoE powered to work with any compliant 802.3af PoE network switch or mid-span injector, external +24VDC supply

Spec Sheet

Manual