- Description
Details
The ATND8734a is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable. Additionally, logic input screw terminals accept an external switch for connection to the Dante™ network.
The power module is equipped with an 80 Hz low-cut UniSteep® filter, three-position input gain level selector (+30 dB, +40 dB and +50 dB), and red/green LED status indicator, which can all be controlled remotely via third-party software. Default settings for the power module are as follows: low-cut filter off, +40 dB input gain, LEDs off.
The ATND8734a features a circular cover plate that can be removed and painted with commercially available spray paint.
- Features
Features
- Connects directly to network via Ethernet cable—no need for expensive audio cable or soldering
- TB3M-type input for quick mounting of gooseneck and hanging microphone
- Red/green LED status indicator
- Input gain, low-cut filter and LED indicator ring are controlled remotely
- Logic input accepts external switch for connection to the Dante™ network
- Specification
Frequency Response 20 - 20,000 Hz Input Connector TB3M-type Output Connector RJ45 Low Frequency Roll-off 80 Hz, 18 dB/octave Maximum Input Levels -15 dBu @ +30 dB gain
-25 dBu @ +40 dB gain
-35 dBu @ +50 dB gainAccessory Included Fixing screw x 4 Dimensions (Dia x D) 5.83" (148 mm) x 1.85" (47 mm) Weight 330 g (11.6 oz) - Documents
Documents
- Reviews
Write Your Own Review