Audio-Technica ATUC-50CU Control Unit
Usually arrives in 5-9 business days.
The Audio-Technica ATUC-50INT is an interpretation unit enhancing the ATUC-50 conferencing system with up to three (3) language interpretation.
The ATUC-50INT is an interpretation unit enhancing the ATUC-50 conferencing system with up to three (3) language interpretation. The alphanumeric LED display has 4 buttons where the left-most button selects the choice of the incoming language and the rightmost button selects the choice of outgoing language. The middle two (2) buttons toggle between language select or headphone volume select and control.
There can be up to two (2) ATUC-50INT assigned per language, which enables a total maximum of six (6) ATUC-50INT interpretation units per system. The ATUC-50INT can be placed anywhere in the chain/ring and does not require a proprietary cable run.
The ATUC-50INT features relayed interpretation. This enables the interpreter to choose between listening to the floor (spoken) language or to another interpreted language (Language 1). If there are two (2) ATUC-50INT units per language these can be setup in three different modes:
– Interlock: one unit can override the other unit
– No interlock: no unit can override the other unit while active
– Combined: Both units can be active at the same time
The configuration of all ATUC-50INT interpretation units can be set up using the built-in Web Remote conference management software on the ATUC-50CU Control Unit.
| Dynamic Range | 107 dB A-weighted |
|---|---|
| Frequency Response | + 1.0, – 2.0dB, 20Hz~20kHz, refer to +4dBu output @ 1kHz |
| Audio Sampling | 24 Bit/48 kHz |
| Signal-to-Noise | 87 dB, A-weighted |
| I/O Connectors | Inputs: MIC (Neutrik XLR-F) Outputs: Headphones x 1 LINK/CHAIN: DU RJ45 A/B terminals |
| Headroom | 20 dB |
| Equivalent Input Noise | Less than –121dBu, Rs=150 ohm |
| Total Harmonic Distortion | Less than 0.07% @1kHz unity |
| Phantom Power | DC +24V |
| Power Supply | DC +48V |
| Power Consumption | 2.2 W |
| Operation Temperature | 0~40° C |
| Operation Hhumidity | 25-85% |
| Finish | Top panel: Gun metal - Enclosure: Black |
| Included Accessories | Quick setup guide, warranty sheet |
| Dimensions (H x W x D) | 5.83" (148.3 mm) x 3.31" (84.2 mm) x 5.31" (135 mm) |
| Weight | 1.25 lbs (0.57 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.