Audio-Technica ATW-901/G Frequency-Agile VHF Wireless System (Discontinued)

Audio-Technica ATW-901/G Frequency-Agile VHF Wireless System (Discontinued)

Name: Audio-Technica ATW-901/G Frequency-Agile VHF Wireless System (Discontinued)
Brand: Audio-Technica
SKU: AT-ATW-901/G
Price: 149.95 USD
Availability: OutOfStock

Write a Review

Part #:

ATW-901/G

Model #:

ATW-901/G

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The ATW-901/G includes the ATW-R900 receiver and ATW-T901 UniPak® transmitter with AT-GcW guitar/instrument input cable.

Description

Audio-Technica's System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, headworn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz).

Each System 9 configuration includes the ATW-R900 receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900 also offers volume control along with AF Peak, RF and Power indicator lights.

The ATW-901/G includes the ATW-R900 receiver and ATW-T901 UniPak® transmitter with AT-GcW guitar/instrument input cable.

Features

Easy operation and clear, natural sound quality
4 selectable frequency-coordinated VHF channels
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Balanced XLR and unbalanced 1/4¡± output jacks enable use with a wide variety of audio gear

Specifications

Overall System
Operating Frequencies	VHF Highband, 169 MHz to 172 MHz
Modulation Mode	FM
Maximum Deviation	+/-10 kHz
Dynamic Range	>/=90 dB (A-Weighted), Typical
Total Harmonic Distortion
Operating Range	200' (60 m) Typical) Open Range Environment with No Interfering Signals
Operating Temperature Range	40° F (4° C) to 110° F (43° C) Battery Performance May Be Reduced at Very Low Temperatures
Frequency Response	80 Hz to 13 kHz
Receiver
Receiving System	Non-Diversity, Single-Channel, Dual Antenna System
Image Rejection	50 dB Minimum
RF Sensitivity	20 dBuV at 60 dB S/N Ratio (50 ohms Termination)
Audio Output	Nominal Output Level XLR, Balanced: 350 mV (1 kHz Modulation, 10 kHz Deviation, 100k ohm Load) 1/4" (6.3 mm), Unbalanced: 700 mV (1 kHz Modulation, 10 kHz Deviation, 100k ohm Load)
Power Supply	100-240V AC (50/60 Hz) to 12V DC .5A (Center Positive) Switched Mode External Power Supply
Accessory Included	Power Supply
Dimensions (H x W x D)	1.82" (46.2 mm) x 7.48" (190 mm) x 5.06" (128.5 mm)
Net Weight	0.742 lbs (0.337 kg)
Body-Pack Transmitter
RF Power Output	10 mW
Spurious Emissions	Following Federal and National Regulations
Input Connections	Four-Pin Locking Connector Pin 1: GND Pin 2: Inst Input Pin 3: Mic Input Pin 4: DC BIAS +9V
Batteries	Two 1.5V AA Not Included
Battery Life	8 Hours (Alkaline) Depending on Battery Type and Use Pattern
Dimensions (H x W x D)	4.08" (103.7 mm) x 2.76" (70.2 mm) x 70.2" (24.9 mm)
Net Weight	0.176 lbs (0.08 kg)
Handheld Transmitter
RF Power Output	10 mW
Spurious Emissions	Following Federal and National Regulations
Batteries	Two 1.5V AA Not Included
Battery Life	8 Hours (Alkaline) Depending on Battery Type and Use Pattern
Accessory Included	AT8456a Quiet-Flex Stand Clamp
Dimensions (Dia x L)	2.11" (53.5 mm) x 9.91" (251.8 mm)
Net Weight	0.573 lbs (0.26 kg) without Batteries