Audio-Technica ES945SV/LED Omnidirectional Condenser Boundary Microphone with Mute Switch and LED Indicator

Home /
Audio-Technica ES945SV/LED Omnidirectional Condenser Boundary Microphone with Mute Switch and LED Indicator - Silver (Discontinued)

Description

Details

Audio-Technica ES945SV/LED Omnidirectional Condenser Boundary Microphone
for Sound Reinforcement, Professional Recording, Teleconferencing, Television and Other Sound Pickup Applications

With its low-profile design that mounts unobtrusively in tabletops for minimum visibility, the ES945/LED omnidirectional condenser boundary microphone provides clear, highly intelligible audio that is perfect for sound reinforcement, professional recording and teleconferencing, television and other demanding sound pickup applications.

Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone’s omnidirectional polar pattern affords a 360° pickup angle, while its UniGuard® RFI-shielding technology provides outstanding rejection of radio frequency interference (RFI). Users can easily toggle between mute and live audio thanks to the microphone’s capacitive-type touch-sensitive switch. An integral Red/Green LED ring indicates the mute status, staying green when the microphone is live and turning red when it is muted.

Additionally, the ES945/LED is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module.

The microphone is available in two colors: black (ES945/LED) and silver (ES945SV/LED). A pair of isolators is included for optional mechanical isolation from the mounting surface.

Features

Features

Mounts unobtrusively in tabletops
Capacitive-type touch-sensitive switch allows users to easily mute/un-mute the microphone
Integral bicolored LED ring indicates mute status – stays green when mic is live, turns red when muted
Low-profile element provides uniform omnidirectional polar pattern with 360° acceptance angle
Slef-contained power module with XLRM-type output connector
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Requires 11V to 52V DC phantom power
Rugged all-metal case with a two-layer steel mesh grille
Isolators provide mechanical dampening of mounting surface vibration
Available in two colors: black (ES945/LED) and silver (ES945SV/LED)

Specification

Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Omnidirectional
Frequency Response	40-19,000 Hz
Open Circuit Sensitivity	-40 dB (10 mV) re 1V at 1 Pa
Impedance	200 ohms
Maximum Input Sound Level	142 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical)	113 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	65 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 5.7 mA typical
Switch	Touch-sensitive control: on/mute
Output Connector	Integral 3-pin XLRM-type
Accessories Furnished	One pair isolators
Dimensions (H x W x Dia)	3.33" (84.8 mm) x 1.89" (48 mm) x 1.49" (38 mm)
Weight	0.14 lbs (0.065 kg)

Documents