The ADX18 is a professional 18" gooseneck condenser cardioid microphone designed for applications such as podiums, presentations, meetings, and teleconferencing.
With a uniformly controlled cardioid polar pattern, the ADX18 helps isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control.
The ADX18 is designed with integrated preamp circuitry built into the base of the XLR. It can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit the microphone holder.
Designed, manufactured, assembled, and tested by Audix in the USA.
| Transducer Type | Pre-Polarized Condenser |
|---|---|
| Frequency Response | 40 Hz - 18 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 150 Ohms balanced |
| Sensitivity | 24 mV / Pa @ 1k |
| Equivalent Noise Level | 28 dB (A weighted) |
| Signal to Noise Ratio | 66 dB |
| Power Requirements | 18 - 52 V phantom |
| Maximum SPL | ≥120 dB |
| Cable/Connector | 3 pin gold plated male XLR connector |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Housing/Finish | Machined Auminum and Brass /Black matte |
| Dimension (H) | 22" (558 mm) |
| Weight | 0.350 lbs (0.16 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
