Audix Novacore NC2BX10 Digital Wireless Dual Lavalier System with Dante, NCR2 Receiver, Two NCBP Bodypack Transmitters, and Two ADX10 Lavalier Microphones (494 - 542 MHz)
Usually arrives in 5-9 business days.
The NCBX10 is a professional digital wireless lavalier system within the Audix Novacore ecosystem, combining the NCR1 receiver, NCBP bodypack transmitter, and ADX10 lavalier microphone for exceptional vocal clarity and dependable RF performance. Designed for presentations, theater, worship, broadcast, and live sound applications, the system delivers pristine 24-bit digital audio with ultra-low latency below 3ms and a dynamic range of 116 dB or greater for detailed, natural sound reproduction. The included ADX10 lavalier microphone features a miniaturized cardioid condenser capsule specifically voiced for speech intelligibility and consistent vocal performance.
Built for demanding professional environments, the NCR1 receiver features a rugged all-metal half-rack chassis, high-visibility displays, intuitive menu navigation, and fast IR synchronization for seamless setup and pairing. The system operates across a 48 MHz tuning range with a 50 MHz bandwidth and wideband UHF digital transmission, supported by a high-performance RF front end with excellent image rejection, ensuring reliable signal stability in crowded wireless environments. AES-256 encryption ensures secure wireless operation, while the rear-panel RJ11 port enables remote control and monitoring capabilities.
The NCBP bodypack transmitter provides a feature-rich interface for performers and engineers, along with flexible power options that support both rechargeable lithium-ion and AA alkaline batteries for up to 16 hours of operation. As part of the scalable Audix Novacore platform, the NCBX10 integrates easily into high-channel-count wireless systems. It supports future expansion with advanced coordination and networking solutions for mission-critical productions.
| NCR1 Receiver | |
|---|---|
| RF Frequency Range | UHF 494 - 542 MHz |
| RF Bandwidth | 48 MHz |
| Display | LCD |
| Control Interface | Power button, Sync button, Jog dial |
| Frequency Response | 20 Hz - 20 kHz ( |
| Power Requirements | 12 VDC @ 300 mA |
| Dimensions (H x W x D) | 1.73" (44 mm) x 8.27" (210 mm) x 6.41" (163 mm) |
| Weight | 2 lbs (0.9 kg) |
| NCBP Transmitter | |
| RF Frequency Range | UHF 494 - 542 MHz |
| RF Bandwidth | 48 MHz |
| Display | LCD: Displays GRP‑CH, battery status, RF signal strength, and settings menu |
| Audio Control | Variable gain: –12 dB to +18 dB in 6 dB steps; low cut; limiter; phase invert |
| Power Requirements | (1) NCLB Li-ion battery (1500 mAH) or (2) AA alkaline |
| Battery Charging | AUDIX NCC1 or NCC2 charging station, or USB‑C |
| Dimensions (H x W x D) | 3.15" (80 mm) x 2.60" (66 mm) x 0.98" (25 mm) |
| Weight | 0.21 lbs (0.1 kg) |
| ADX10 Microphone | |
| Transducer Type | Pre-Polarized Condenser |
| Frequency Response | 50 Hz - 18 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 800 ohms |
| Sensitivity | 5 mV/Pa @ 1k |
| Equivalent Noise Level | |
| Maximum SPL | ≥120 dB |
| Power Requirements | 9-52V phantom |
| Length | 0.98" (25 mm) |
| Weight | 0.05 lbs (0.02 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.