Designed, assembled and tested by Audix in the USA, the OM6 is a dynamic vocal microphone used for a wide variety of live, studio, and broadcast applications. It is known for its broad frequency response, full-bodied and articulate sound reproduction, resistance to feedback and ability to handle high sound pressure levels in excess of 144 dB without distortion.
The OM6 is characterized with a tight and uniformly controlled hypercardioid polar pattern which helps to isolate the vocals from the rest of the instruments on stage. With a wide frequency range of 40 Hz - 19 kHz, the OM6 employs a VLM™ (Very Low Mass) diaphragm for a clean and natural sound with exceptional transient response.
The OM6 response is tailored with condenser-like qualities: a smooth rising response between 2k Hz - 10 kHz along with a flat and fully extended bass response from 60 Hz - 1 kHz. This, in conjunction with an extremely articulate mid-range, makes it an excellent choice for broadcast and live recording applications. This mic is well balanced, comfortable to hold, and designed with high standards and tight tolerances.
The OM6 is manufactured with precision die cast zinc alloy body, durable black E-coat finish, dent resistant steel mesh grill, and gold plated XLR connector.
| Model | OM6 |
|---|---|
| Product Type | Dynamic Vocal Microphone |
| Transducer Type | Dynamic |
| Frequency Response | 40 Hz - 19 kHz |
| Polar Pattern | Hypercardioid |
| Impedance | 290 ohms |
| Sensitivity at 1k | 1.5 mV / Pa @ 1k |
| Capsule Technology | VLM Type D |
| Off Axis Rejection | > 25 dB |
| Maximum SPL | ≥144 dB |
| Connector | 3-pin XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output |
| Housing / Finish | Zinc Alloy / Black E-coat |
| Weight | 10.8 oz (307 g) |
| Length | 6.9" (176 mm) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
