Ideal for use with in-ear monitors and headphones, the A360 delivers breakthrough features for more precise mix control and more musical monitoring, while also preserving the simplicity required for use while performing.
The A360 includes an advanced 36-channel mix engine which can be used to mix up to 16 mono or stereo standard channels plus mono or stereo ambiance and the Dual Profile Channel. Each A360 in a system may use the default channels, or audio channels can be selected and assigned individually for each personal mixer, drawing from a network pool of up to 64 channels.
Each A360 mix channel may be adjusted for volume, tone, and reverb. The A360 also includes the innovative Stereo Placement pan-spread control that allows the width of a stereo channel’s image to be controlled independent of its left-right placement in the stereo field, significantly improving the user experience with in-ear monitors and headphones.
The A360’s seventeenth mix channel the Dual Profile Channel provides users with instant access to two independent combinations of channel volume, tone, reverb, and stereo placement for a favorite channel. The Dual Profile Channel may be set to mirror one of the 16 standard mix channels or may be used for additional mix content. Ambiance can be added to the mix either using the convenient onboard ambient microphone or by using network audio channels. Regardless of the source of the audio, the A360 One-Touch Ambience streamlines control of ambiance levels during a performance, allowing musicians to add or remove ambiance with the single touch of a button.
Each A360 can store up to twenty mix snapshots 16 saved in the channel button locations plus another four assigned to dedicated Instant Mix Recall buttons.
| Audio Output | 1/4" TRS stereo, headphone or line level; 1/8" TRS stereo, headphone or line level; XLR balanced mono, line level |
|---|---|
| Stereo Mix Outputs, Headphone/Line | Tip: Audio Left; Ring: Audio Right; Sleeve: Ground |
| Mono Mix Output | Pin 2: Hot, Pin 3: Cold; Pin 1: Ground |
| A-Net | 1 A-Net In, EtherCon RJ45 connector; Supports Pro16 and Pro16e |
| Digital to Analog Conversion & Bit Depth | 44.1/48kHz, 24-bit |
| Stereo Operation | Stereo Link, per channel pair; Set at the input module Variable pan per mono channel or pan/spread per stereo channel pair |
| USB Storage | Save/load mix configuration data and mixer presets; Firmware updates |
| Headphone Output | 1.0 watt at 100 ohms (Line/Headphone output) |
| Output Impedance | 32 ohms |
| Frequency Response | 2-22kHz +0.2dB/-3dB |
| THD+N | < 0.003% |
| Crosstalk | -90dB |
| Signal to Noise (Unweighted) | -106dB (measured with zero data into all channels) |
| Latency | |
| Pro16e A-Net | Use unshielded Cat-5e UTP (or better) cable; Maximum 400 ft (122 m) between devices; Supports Power Over A-Net |
| Power Supply | |
| Power Supply | External, DC, universal switching type |
| Input Voltage | 100-240 volts, 50/60Hz, 30VA |
| Output Voltage | 24 VDC, 0.5 amp |
| Plug Size | 2 mm |
| Dimensions (H x W x D) | 1.835" (46.61 mm) x 11" (279.4 mm) x 6.9" (175.26 mm) |
| Weight | 3.4 lbs (1.54 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
