Special Order (Return conditions apply)
Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email sales@proacoustics.com or call us at 888-256-4112.The Desono DX-IC8 rewrites the cost-to-performance equation for high-end ceiling loudspeakers. Able to fulfill a wide variety of needs, the DX-IC8 exceeds the performance of competing “high-ceiling” models. Foreground music, high-level paging, and augmentation of large music systems as a delay or fill speaker in ancillary zones are all within the capability of this versatile performer. It is ideal for high ceiling applications.
Uniform voicing among the Desono DX product family makes for an easy match to the other models in the series, while a host of design innovations set the DX-IC8 apart from other products in its size and price range. Featuring genuine coaxial design with separate magnets for the LF and HF drivers, the DX-IC8 exhibits reduced distortion and industry-leading sensitivity permitting 3 dB to 6 dB greater output level, while requiring half the amplification power of competing products.
Patent-pending SpringLock™ clamps allow singlehanded placement to speed installation and reduce labor time. The SpringLock spring-loaded clamps support the back can on the included tile rails and snap-on C-ring, so that the installer no longer needs to hold the can against the tile while tightening the clamps.
The front-face wattage selector switch enables quick adjustment of 70V/100V tap levels. A variety of installation accessories are available to accommodate different ceiling materials.
| Operating Mode | Passive with DSP |
|---|---|
| Operating Environment | Indoor |
| Operating Range (-10 dB) | 60 Hz to 20 kHz |
| Nominal Beamwidth (H x V) | 100°, conical |
| Transducers | LF 1 x 8" (165 mm) HF 1 x 1.25" (32 mm) exit compression driver |
| Nominal Maximum SPL | Peak 123 dB Continuous 117 dB |
| Autoformer | 70V: 120W, 60W, 30W, 15W 100V: 120W, 60W, 30W |
| Recommended Amplifiers | 150 W - 300W @ 8 Ω, (35V - 49V) |
| Input Connection | 4-position Euroblock connector |
| Controls | Front-face wattage / low impedance selector switch |
| Mounting Provisions | 4 SpringLock mounting clamps with 3-inch grip range |
| Certifications | ETL listed to comply with UL1480, UL2043 and CSA62368-1 Suitable for use in air handling spaces per NFPA 70 and NFPA 90 |
| Included Accessories | C-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template |
| Cutout Diameter | 12.20" (310 mm) |
| Dimensions (Dia x D) | 13.43" (341 mm) x 8.51" (216 mm) |
| Weight | TBD |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
