Special Order (Return conditions apply)
Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email sales@proacoustics.com or call us at 888-256-4112.The Desono™ DX-S8 surface mount loudspeakers provide high efficiency, high output, high intelligibility and low distortion in an attractive design. These loudspeakers install quickly and have the same components and voicing as the DX ceiling loudspeakers. The DX surface mount loudspeakers are equipped with a built-in 70V/100V autoformer and low impedance input.
For larger installations, the 8-inch coaxial DX-S8 provides higher sound pressure levels, higher sensitivity and greater bass extension. The DX-S8 also easily outperforms competitive loudspeakers of similar size. With a modern appearance that merges well in most environments, combined with weather-resistant capability suitable for direct outdoor use, the DX-S8 can be used in a wide variety of speech and music applications.
Installation is simple and flexible with Biamp's innovative, patented ClickMount pan-tilt bracket allowing low profile mounting in either vertical or horizontal orientation without moving the bracket position. The power tap switch can be set before the speaker is mounted on the bracket. Models with the U-Bracket are also available for low-profile mounting and include the ClickPlug with an integrated gland nut for weather-resistant applications. Both brackets are theft and tamper resistant.
| Operating Mode | Passive with DSP |
|---|---|
| Operating Environment | Indoor / Outdoor |
| Operating Range (-10 dB) | 60 Hz to 20 kHz |
| Nominal Beamwidth (H x V) | 115°, conical |
| Transducers | LF 1 x 8" (203 mm) HF 1 x 1.25" (32 mm) exit compression driver |
| Nominal Maximum SPL | Peak 123 dB Continuous 117 dB |
| Autoformer | 70V: 120W, 60W, 30W, 15W 100V: 120W, 60W, 30W |
| Recommended Amplifiers | 150 W - 300 W @ 8 Ω, (35 V - 49 V) |
| Input Connection | Lever-actuated wire clamping 4-position terminal block with pass-through |
| Controls | Wattage / low impedance selector switch |
| Mounting Provisions | ClickMount pan-tilt bracket (included) |
| Certifications | ETL listed to comply with UL 1480A and CSA 62368-1 |
| Dimensions ( H x W x D) | 15.16" (385 mm) x 10.04" (255 mm) x 10.24" (260 mm) |
| Weight | TBD |
Usually arrives in 5-9 business days.
