Bogen Communications C35 Classic Series 35W Public Address Amplifiers
The Bogen Communications C35 is a public address mixer amplifier that provides the mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.
| Model | C35 |
|---|---|
| Product Type | Classic Series Public Address Amplifier |
| Power Output (RMS) | 35W |
| Frequency Response & Distortion | |
| Transformer | 70 - 16 kHz (± 2 dB) @ 1% max |
| 4-Ohm Direct Output | 20 - 20 kHz (± 1 dB) @ 0.5% max |
| Hum and Noise | |
| MIC | 55 dB below rated output |
| AUX / TEL | 70 dB below rated output |
| Input Sensitivity | |
| MIC Lo-Z Balanced | 600μV |
| AUX | 85mV |
| TEL | 75mV |
| Outputs | 8 ohms, 16 ohms, 25V, 70V transformerisolated balanced or unbalanced; 4 ohms direct unbalanced |
| Output Connections | Screw terminal strip, TAPE/BOOSTER jack; WMT1A jack (requires accessory transformer) |
| Input Connections | Screw terminals for MIC and TEL, two AUX Hi-Z jacks |
| Controls | MIC1, MIC2/AUX (switch selected), AUX 2, BASS, TREBLE, TEL, VOX |
| Tone Control | Treble, ±11 dB @ 10 kHz; Bass ±11 dB @ 100 Hz |
| Power Requirements | 85W; 120V AC, 60 Hz |
| Dimensions (H x W x D) | 3.75" (95.25 mm) x 14.5" (368.3 mm) x 11" (279.4 mm) |
| Shipping Weight | 15 lbs |
Usually arrives in 5-9 business days.
