- Description
Details
The Plena mixer is a high performance, professional public address mixer with modern state‑of‑the‑art features. Combined with the PLE-1P120-US or PLE-1P240-US amplifiers, you can build an easy-to-operate yet powerful and flexible public address system. All this without sacrificing features such as ducking, priority, and flexibility. The mixer fills a wide variety of public address requirements yet is surprisingly affordable.
More unique features are available such as detachable labels where the user can write the names for inputs, music sources and zones. These labels can then be mounted on the front, protected by the clear window. Another useful feature is to indicate preferred settings on the front panel by inserting colored pins at the preset levels of all knobs. You can then instruct a user to set all the controls to the green pins to configure the system for their particular use. A second user can set all controls to the red pins for their configuration.
The mixer has two zone outputs. The music can be switched on and off in the zones via the front panel and optional wall panel. Announcements from the PLE-2CS two-zone call station can be routed to zone 1 or zone 2, or both. Announcements from the tel/70 V input or inputs 1 & 2 are routed to both zones. Input 1 can be used for a PLE-1CS allcall call station or any other microphone or call station with a PTT contact. The unit also has a line output to connect the preamplifier output before zone selection, making it possible to create a third zone. This output can be switched to music only, for example, so that music on hold can be provided for the telephone system. Loop-through input and output connections enable external sound processing equipment (e.g., an equalizer or Plena feedback suppressor) while maintaining a balanced connection to the amplifiers.
- Features
Features
- 6 microphone/line inputs, plus 3 music source inputs
- 70 V, telephone and a call station input with priority & VOX
- 2 zones and 2 channel operation
- Voice-activated emergency override
- 2 tone chime built in, 7 more chimes optional with call station
- Outputs for line out, music only out, and insert point
- 24 V backup power with built‑in 24 V charger
- Separate tone controls for microphones and music sources
- Specification
Voltage 115 - 230 VAC ±10%, 50/60 Hz Power Consumption 24 VA Frequency Response 50 Hz to 20 kHz (+0/‑3 dB) Distortion <0.1% @ rated output power,1 kHz Low Control Max -12/+12 dB (frequency issetting dependent) Sensitivity 1 mV (mic); 200 mV (line) S/N (flat at max volume) >63 dB (mic); >70 dB (line) Speech Filter -3 dB @ 315 Hz, high-pass, 6 dB/oct Phantom Power Supply 16 V via 1.2 kohm (mic) Operating Temperature +14 ºF to +131 ºF Storage Temperature -40 ºF to +158 ºF Relative Humidity <95% Finish Charcoal Dimensions (H x W x D) 3.94" (100 mm) x 16.93" (430 mm) x 10.63" (270 mm) Weight 9.9 lbs (4.49 kg) - Reviews
Write Your Own Review
