Bose Front Fill Sound System with 4 RoomMatch Utility Speakers and PowerShare Power Amplifier (Discontinued)

Bose RoomMatch Utility RMU206 Dual 6.5" Small-Format Under-Balcony Fill Loudspeakers:

• Award-winning RoomMatch sound – now in smaller, 2-way, point-source designs for high-level foreground music, under-balcony, and zone-fill applications
• Bose EMB2 compression driver – for lower distortion and improved vocal clarity compared to conventional foreground/fill models; also provides consistent mid/high sonic character to that of RoomMatch full-range and other RoomMatch Utility models
• Minimal height for under-balcony or low-ceiling mounting – unique enclosure baffle design provides minimum projected height for under-balcony or low-ceiling mounted applications
• 120° x 60° constant-directivity high-frequency horn – gives wide, even coverage and may be rotated in enclosure. Can reduce the number of speakers required for under-balcony applications
• 2 x Bose LF6 6.5-inch woofers – with extended-excursion voice coils extend response to 80 Hz for lowest vocal range
• Quasi-3-way passive crossover with separate filters for each transducer – provides more consistent frequency and polar response compared to conventional crossover designs
• 80 Hz – 16 kHz frequency response and 122 dB maximum peak SPL – deliver the performance required for most demanding under-balcony and zone-fill applications
• Flexible mounting with included U-bracket – rear enclosure panel also includes 4 x M8 threaded inserts in 5.0” x 2.75” (127mm x 70mm) pattern to accept third-party accessory mounting brackets
  
  

Bose PowerShare PS602 Adaptable Power Amplifier:

• PowerShare Technology - Patented PowerShare technology allows the total 600 watts of power to be shared asymmetrically across all outputs, as each output is capable of delivering full power. Instead of selecting amplifier power based on the needs of the largest zone, installers now have the freedom to use total amplifier power in the application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
• Load-Independent Outputs - Each channel can be configured for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging, use of jumpers, or software settings.
• DFL™ System - The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch® amplifier line, improves performance and reliability through continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion, while protecting loudspeakers.
• Integrated Loudspeaker Processing with Optional PowerShare Editor Configuration - For applications requiring additional signal processing the PowerShare Editor Software offers real-time selection and control of Bose loudspeaker EQs, 9-band PEQs, mixing, crossover, limiters, delay, and mute/output polarity through a USB connection. For basic setups without a PC, rear-panel settings allow installers to recall Bose loudspeaker equalization and protection per output channel. These features eliminate the need for an external signal processor in many applications.
• ControlCenter Zone Controller Accessories - Bose ControlCenter CC-1 zone controllers can be directly attached for remote adjustment of amplifier outputs further extending stand-alone amplifier applications.
• Auto-Standby - Designed to save power consumption when not in use. PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.