- Description
Details
ART USB Dual Pre Project Series Two Channel Preamp with USB
The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case.
It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced.
- Features
Features
- USB Connectivity to Desktop and Laptop Computers
- Low Noise Fully Balanced XLR and 1/4-inch TRS Combi Inputs
- Up to 48 dB of Clean Gain
- Built-in Low Noise Phantom Power Supply
- Latency Free Monitoring Mix and Level Controls
- Independent Channel Gain Controls
- 1/4-inch TRS Balanced Monitor and 1/8-inch Headphone Monitor Outputs
- Compact, Stackable all Aluminum Chassis
- Flexible 3-way Power from USB, External Supply, or 9 Volt Battery
- Specification
Frequency Response 20 Hz – 20 kHz (+0, -1 dB) THD <0.01% @ 1 kHz CMRR >60 dB Channel Separation >75 dB Signal to Noise Ratio >90 dB (Ref 0 dBu) Equivalent Input Noise -120 dBu typical (XLR balanced, gain @ maximum) Input Impedance >300k Ohms 1/4-inch input, >4k Ohms XLR input Output Impedance 600 Ohms (balanced 1/4-inch), 50 Ohms (headphone 1/8-inch) Maximum Signal Level +6 dBu in, +10 dBu out (balanced), +4 dBu out (single ended) Maximum Gain +48 dB (balanced in-out) Phantom Power Switch selectable, +48Volts DC, filtered, current limited Input Connections XLR / 1/4-inch TRS "Combo" jack balanced or unbalanced Output Connection 1/4-inch TRS balanced, 1/8-inch TRS headphone mini jack A/D-D/A 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer 0.4 ms A/D latency @ 44.1 kHz Computer Interface USB 1.1 compliant, Windows 98SE/ME/2000/XP/Vista 32 bit, Apple OS9.1/OSX computer w/native USB support Chassis Type All aluminum black anodized with integral rubber sides Power Requirements 7.5-12V AC or DC @ <150mA (external) or USB bus powered or 9V Battery @ 20mA typical, 50mA max. Dimensions (H x W x D) 1.75" (44.5 mm) x 4.6" (117 mm) x 4.7" (119 mm) Weight 1.3 lbs (0.59 kg) - Documents
Documents
- Reviews
Write Your Own Review