Ashly Audio
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.
Talk To An Audio Engineer
Choosing Ashly Audio Amplifiers
Most people feel overwhelmed when choosing Ashly Audio amplifiers, signal processors, and power amplification solutions for use in commercial sound and public address systems. Don’t worry. With over 100 years of collective audio design experience, we’ve got you covered. Ashly amps are made to run 24/7 365 days a year and last in any challenging environment.
1. Select Ashly Audio Amplifier Solution
Choose the Ashly multi-channel and multi-zone capable power amplifier, networking amplifier, or DSP matrix signal processing product from the list below that you feel will best meet your commercial audio 25V, 70V and 100 volt distributed audio, background music, paging, or public address sound system needs. Don’t worry, this is just a starting point.
2. Customize with a Sales Engineer
One of our Sales Engineers will guide you in finalizing a product selection that is tailored to your application and budget.
3. Purchase the Right Product for You
Feel confident knowing that the equipment you have purchased is designed by a qualified audio engineer and will work - exactly the way you need it.
Shop with Confidence
Our committed, experienced professional sales engineers deliver reliable designs and provide lifetime tech support for all products.
-
Ashly Audio ne4400 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 4x8 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 8 Out)
The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 8x4 Network-Enabled Audio Matrix Processor with Protea DSP (8 Input x 4 Out)
The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne4800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 12x4 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 4 Out)
This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.
-
Ashly Audio ne4250 Network-Enabled 4-Channel Power Amplifier 4 x 250W @ 4 Ohms
This Ashly Audio ne4250 four-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.
-
Ashly Audio ne4250.70 Network-Enabled 4-Channel Power Amplifier 4 x 250W @ 70V
Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70 network enabled four-channel amplifier provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection.
-
Ashly Audio ne8800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne8800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 12x8 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne4250pe Network-Enabled 4-Channel Power Amplifier 4 x 250W @ 4 Ohms with Protea DSP
This Ashly Audio ne4250pe four-channel networked-enabled power amplifier with Protea DSP is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.
-
Ashly Audio ne8250 Network-Enabled 8-Channel Power Amplifier 8 x 250W @ 4 Ohms
This Ashly Audio ne8250 eight-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.
-
Ashly Audio ne4250.70pe Network-Enabled 4-Channel Power Amplifier 4 x 250W @ 70V with Protea DSP
Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70pe network enabled four-channel amplifier with DSP provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection and Protea NE software.
-
Ashly Audio ne8250.70 Network-Enabled 8-Channel Power Amplifier 8 x 250W @ 70V
Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne8250.70 network enabled eight-channel amplifier provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection. -
Ashly Audio ne24.24M 8x16 Network-Enabled Audio Matrix Processor with Protea DSP (8 Input x 16 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 8x16 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 16x8 Network-Enabled Audio Matrix Processor with Protea DSP (16 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 4x20 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 20 Out)
The Ashly ne24.24M 4x20 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio nXe1.52 2-Channel Network Power Amplifier 2 x 1500W @ 2 Ohms
The nXe1.52 Network Power Amplifier is a trust-worthy, network power amplifier that installs and configure into virtually any architecture and sound environment.
-
Ashly Audio ne8250pe Network-Enabled 8-Channel Power Amplifier 8 x 250W @ 4 Ohms with Protea DSP
This Ashly Audio ne8250pe eight-channel networked-enabled power amplifier with Protea DSP is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.
-
Ashly Audio ne8250.70pe Network-Enabled 8-Channel Power Amplifier 8 x 250W @ 70V with Protea DSP
Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne8250.70pe network enabled eight-channel amplifier with DSP provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection and Protea NE software.
-
Ashly Audio nXe3.02 2-Channel Network Power Amplifier 2 x 3000W @ 2 Ohms
The Ashly nXe3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXe3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces.
-
Ashly Audio nXp3.02 2-Channel Network Power Amplifier 2 x 3000W @ 2 Ohms with Protea DSP
The Ashly nXp3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.
-
Ashly Audio nXe3.04 4-Channel Network Power Amplifier 2 x 3000W @ 2 Ohms
The Ashly nXe3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXe3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces.
-
Ashly Audio nXp3.04 4-Channel Network Power Amplifier 2 x 3000W @ 2 Ohms with Protea DSP
The Ashly nXp3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.