Ashly Audio
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.
Talk To An Audio Engineer
Choosing Ashly Audio Amplifiers
Most people feel overwhelmed when choosing Ashly Audio amplifiers, signal processors, and power amplification solutions for use in commercial sound and public address systems. Don’t worry. With over 100 years of collective audio design experience, we’ve got you covered. Ashly amps are made to run 24/7 365 days a year and last in any challenging environment.
1. Select Ashly Audio Amplifier Solution
Choose the Ashly multi-channel and multi-zone capable power amplifier, networking amplifier, or DSP matrix signal processing product from the list below that you feel will best meet your commercial audio 25V, 70V and 100 volt distributed audio, background music, paging, or public address sound system needs. Don’t worry, this is just a starting point.
2. Customize with a Sales Engineer
One of our Sales Engineers will guide you in finalizing a product selection that is tailored to your application and budget.
3. Purchase the Right Product for You
Feel confident knowing that the equipment you have purchased is designed by a qualified audio engineer and will work - exactly the way you need it.
Shop with Confidence
Our committed, experienced professional sales engineers deliver reliable designs and provide lifetime tech support for all products.
-
The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.
Learn More -
List $349.00Price $299.00Savings $50.00 (14%)Control your system from any location with this Network Enabled remote control. The neWR-5 is a programmable remote button controller for Ashly Network Enabled amps and processors.
Learn More -
List $849.00Price $699.00Savings $150.00 (18%)The Ashly FR-8 8-channel DSP network remote fader is a great choice for facilities that use amateur operators for occasional live performances. Mix and match network remotes in a single installation via a standard Cat-5 cable.
Learn More -
List $1,049.00Price $849.00Savings $200.00 (19%)The Ashly FR-16 16-channel network remote fader is a great choice for facilities that use amateur operators for occasional live performances. Mix and match network remotes in a single installation via a standard Cat-5 cable.
Learn More -
The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
Learn More -
The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
Learn More -
The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
Learn More -
Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
Learn More -
The nXp 752 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
Learn More -
Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
Learn More -
The nXp 1502 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
Learn More -
The nXe 754 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
Learn More -
The nXe 1504 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
Learn More -
This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.
Learn More -
This Ashly Audio ne4250 four-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.
Learn More -
The Ashly Audio mXa-1502 mixer amplifier gives your customers multi-zone music distribution, paging, sound-masking and automatic mixing for a wide range of environments.
Learn More -
The Ashly nXe4002 is a 2-channel networkable power amplifier. It features lightweight, energy-efficient Class-D switching amplifier technology combined with a switch mode power supply and includes Ethernet Control using Protea™ NE software.
Learn More -
Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70 network enabled four-channel amplifier provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection.
Learn More -
The nXp 754 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
Learn More -
Complimentary to Ashly's amplifiers, the Ashly ne8800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
Learn More -
The Ashly nXe8002 is a 2-channel networkable power amplifier. It features lightweight, energy-efficient Class-D switching amplifier technology combined with a switch mode power supply and includes Ethernet Control using Protea™ NE software.
Learn More -
The nXp 1504 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
Learn More -
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
Learn More -
The Ashly nXp4002 2-channel networkable power amplifier with Protea DSP is designed to meet the most demanding live sound environments and fixed audio installations anywhere - performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and worship spaces.
Learn More
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.
