Ashly Audio
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.
Talk To An Audio Engineer
Choosing Ashly Audio Amplifiers
Most people feel overwhelmed when choosing Ashly Audio amplifiers, signal processors, and power amplification solutions for use in commercial sound and public address systems. Don’t worry. With over 100 years of collective audio design experience, we’ve got you covered. Ashly amps are made to run 24/7 365 days a year and last in any challenging environment.
1. Select Ashly Audio Amplifier Solution
Choose the Ashly multi-channel and multi-zone capable power amplifier, networking amplifier, or DSP matrix signal processing product from the list below that you feel will best meet your commercial audio 25V, 70V and 100 volt distributed audio, background music, paging, or public address sound system needs. Don’t worry, this is just a starting point.
2. Customize with a Sales Engineer
One of our Sales Engineers will guide you in finalizing a product selection that is tailored to your application and budget.
3. Purchase the Right Product for You
Feel confident knowing that the equipment you have purchased is designed by a qualified audio engineer and will work - exactly the way you need it.
Shop with Confidence
Our committed, experienced professional sales engineers deliver reliable designs and provide lifetime tech support for all products.
-
Ashly Audio KLR-2000 2-Channel High Performance Power Amplifier 2 x 350W @ 8 Ohms
The Ashly KLR-2000 Power Amplifier has been optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000-2500 Watts per channel at 2 Ohms the KLR-2000 is perfectly suited for a wide range of sound reinforcement.
-
Ashly Audio KLR 3200 2-Channel High Performance Power Amplifier 2 x 650W @ 8 Ohms
The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.
-
Ashly Audio CA-1.52 2x1500W at 4 Ohm Power Amplifier (Open Box)
Free Shipping!The Ashly CA-1.52 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
List $1,999.00Regular Price: $1,599.00
Pro Acoustics Price $1,367.99
Savings $631.01 (32%) -
Ashly Audio CA-1.02 2-Channel 2 x 1000W and 4 Ohm Power Amplifier
The Ashly CA-1.02 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Ashly Audio CA-1.52 2-Channel 2 x 1500W at 4 Ohm Power Amplifier
The Ashly CA-1.52 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Ashly Audio nX8002 2-Channel Multi-Mode Power Amplifier
The Ashly nX8002 2-Channel 800W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio CA-1.04 4-Channel 4 x 1000W and 4 Ohm Power Amplifier
The Ashly CA-1.04 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Ashly Audio CA-1.54 4-Channel 4 x 1500W and 4 Ohm Power Amplifier
The Ashly CA-1.54 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.
-
Ashly Audio nX1.52 2-Channel Power Amplifier 2 x 1500W @ 2 Ohms
The nX1.52 Power Amplifier is a trust-worthy, power amplifier that installs and configure into virtually any architecture and sound environment.
-
Ashly Audio nXe1.52 2-Channel Network Power Amplifier 2 x 1500W @ 2 Ohms
The nXe1.52 Network Power Amplifier is a trust-worthy, network power amplifier that installs and configure into virtually any architecture and sound environment.
-
Ashly Audio nX1.54 4-Channel Power Amplifier 4 x 1500W @ 2 Ohms
The Ashly nX1.54 Power Amplifier designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio nXe1.54 4-Channel Network Power Amplifier 4 x 1500W @ 2 Ohms
The nXe1.54 Network Power Amplifier features lightweight, energy efficient Class D switching amplifier technology combined with multiple independent power supplies that provide increased performance and reliability.
Ashly Audio Amplifiers, Processors and Mixers
We offer a wide variety of Ashly Audio amplifiers, mixers, speakers, signal processors, and power amplification solutions for use in commercial sound and public address systems. We carry multi-channel, multi-zone capable power amplifiers, networking amplifiers, and signal processing products that can be configured with Dante™ enabled audio systems.
Featuring:
Ashly digiMix™ digital mixers pack an astonishing feature set into a compact space. You get features that other mixers in this price range simply cannot include, such as 6 DCA groups, the genuine Alps motorized fader, and an ingenious EZ-Mode for the non-technical user with no audio mixing experience.
Ashly Audio nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch-mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150, and 75 Watts per channel.
Ashly Pêma is a matrix mixer with a full 8-in x 8-out matrix mixer, (any input can be assigned to any output or outputs). Pêma is a digital signal processor with the full Protēa™ suite of DSP settings. Then we added gain-sharing automatic microphone mixing, an automatic feedback suppressor, ambient noise detection and adjustment, and a real-time clock with an event scheduler. Pêma features Ashly’s energy efficient Class-D amplifier topology with a switching power supply—and is over 80% energy efficient out of the box.
Ashly TRA Series Amplifiers employ our advanced, efficient amplifiers perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements. They also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation and no annoying fan noise.
Ashly KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers, and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo, or parallel mono), and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
Need help with your new sound system design or need technical advice on your amplifier purchase? At Pro Acoustics, get support fast on Ashly amplifiers.
We offer contractor, integrator, educational, government, and military discounts.
Want to Learn More about Ashly Amplifiers or Get a Price Quote Fast?
For more information, contact our sales engineers at (888) 256-4112 or fill out the "Talk To An Audio Engineer" form to the left, and one of our team members will contact you shortly and help you select and purchase an Ashly amplifier solution.