- Description
Details
The Ashly TRA-4150 power amplifier is a 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise. Of course you get the reliability, superior sonic quality and rugged construction you’ve come to expect from Ashly.
This power amplifier has a 4-channel configuration, with power ratings of 150W per channel at 4 Ohms, 70V and 100V. All TRA audio controls are on the rear panel. A 6-step LED meter for each channel lets you monitor all levels. TRA amplifiers can drive 4 or 8 ohm loads and 25V or 70V and 100V constant voltage lines simultaneously. Output transformers are internally mounted. TRA Series amplifiers also incorporate a switch-mode power supply and Class-D amplifier circuitry, providing an extremely power-efficient solution.
- Features
Features
- Convection cooling
- Extremely low noise
- Internally Mounted Constant Voltage
- Transformers
- Extensive protection circuitry
- Safety/Compliance: cTUVus/FCC
- CE (pending), RoHS
- Specification
Rated Power 8 Ohms (Stereo) 4 x 80W Rated Power 4 Ohms (Stereo) 4 x 150W Rated Power 70V/100V 4 x 150W Rated Power 25V (Stereo) 4 x 150W S/N (20 Hz-20 kHz, unweighted) >105dB 1/8th Output (Pink Noise @ 4 Ohm) 75.0W 1/8th Draw (Pink Noise @ 4 Ohm) 125W 1/8th Current (Pink Noise @ 4 Ohm) 1.98A Idle Power (Pink Noise @ 4 Ohm) 36.0W Idle Current (Pink Noise @ 4 Ohm) 0.62A Frequency Response (8 Ohms) 20 Hz - 20k Hz, ± 1.0 dB Input Impedance 20 k ohms, balanced Input Sensitivity 1dBu (75W), 4dBu (150W) Gain 26dBu, 36dBu Maximum Input Level +21dBu Internal HPF (Switch) 80Hz (default), Off Damping Factor (8 Ohms) > 200 Cooling Convection Output Circuitry Class D Connectors (each channel) Input - each channel 3- Pin Euroblock Output - each channel Screw terminals Front Controls AC Power Switch Front Indicators (LED color) Power (Blue), Standby (Yellow), Protect (Red), Clip (Red) Signal Level –24dB, -18dB, -12dB, -6dB Rear Controls Input Attenuators Gain / Sensitivity: +26dB, +36dB Remote On/Off Delay Amplifier and Load Protection Output Overcurent, DC Output, Main Supply Rail Overvoltage, Chassis Temperature, Inrush Limiting Cordset 3-Prong IEC Dimensions (H x W x D) 3.50" (88.9 mm) x 19" (483 mm) x 11" (279.4 mm) Net Weight 30 lbs (13.6 kg) Shipping Weight 35 lbs (16 kg) - Reviews
Write Your Own Review