AtlasIED

The Atlas Sound FA42T-6MB 4 inch Coaxial In-Ceiling Loudspeaker features the entire 4" speaker, transformer, selector switch, and front plate assembly found in the FAP42T assembly. The footprint allows the motor board to fit into all original Strategy Series 6" enclosures in the exact same manner as a regular 6" FA speaker.

Designed specifically for installations that may be targeted by vandals, the VP14 system from AtlasIED provides highly intelligible speech reinforcement with the added benefit of extreme ruggedness.

The attractive Atlas Sound 61-12W 12 inch Decorative Steel Baffle features concealed loudspeaker mounting studs for easy installation and a clean appearance. The 61-12W accommodates standard 12" (305 mm) loudspeakers.

The Atlas Sound 164-12A 12 inch Deluxe Steel Wall or Ceiling Baffle features an attractive beveled edge baffles and a square loudspeaker cutout. A separate loudspeaker mounting plate provides for an extended bass response.

The Atlas Sound BT720-4 4" in-ceiling loudspeaker with T720-4 baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The Atlas Sound D161-8 8 inch In-Ceiling Loudspeaker with 161-8 Baffle is ideal for use wherever a general-purpose paging and music loudspeaker is required. Quality components are factory wired and shipped complete with dual-cone loudspeaker, dual-voltage transformer and round or square grille.

The Atlas Sound VP161A-APF recessed vandal proof baffle for APF loudspeakers features security for a variety re-entrant horn loudspeakers. It is manufactured from special self-aging aluminum alloy with a tensile strength of 44,000 P.S.I.

The Atlas Sound GA-15T loudspeaker is a utility horn perfectly suited for voice paging and music transmission. Double re-entrant horn construction optimizes loudspeaker output to penetrate ambient sound levels.

The Atlas Sound M1000-W 8" sound masking speaker assembly is designed to accurately reproduce the required spectrum of masking signal into the plenum space. With a majority of America’s workplaces having adopted an open office plan, favoring a labyrinth of cubicles over traditional closed offices, conversational privacy has become an increasingly sensitive issue. A properly designed sound masking system can significantly increase speech privacy and improve the overall work environment.

The Atlas Sound UHT25C-U51-8 8 inch Loudspeaker for Fire Protective Signaling is an 8" diameter single voice coil loudspeakers equipped with dual (whizzer) cone and 10 oz ceramic magnet to deliver extended frequency response with high intelligibility and minimal distortion.

Atlas Sound UHT70C-U51-8 8 inch Loudspeaker for Fire Protective Signaling are 8" diameter single voice coil loudspeakers equipped with dual (whizzer) cone and 10 oz. ceramic magnet to deliver extended frequency response with high intelligibility and minimal distortion.

The Atlas Sound B161-4 4 inch In-Ceiling Loudspeaker with 161-4 Baffle incorporates the popular Atlas Sound FC104 high performance loudspeaker, recognized for full-range voice and music reproduction. The B161-4 provides wide-angle sound dispersion to achieve desired coverage with fewer loudspeakers in distributed systems.

The attractive Atlas Sound BT720-4-T47 4 inch In-Ceiling Loudspeaker with T720-4 Baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The Atlas Sound IP-SA incorporates the 8" model C803A coaxial speaker and a square grille finished in white epoxy. The IP-SA is designed to be used in conjunction with an Atlas Sound IP speaker, models I8X(-CK) in applications where two speakers are required but expense is a factor.

The Atlas Sound AS-120-592 is a 12-inch deep sturdy shelf with wire access that provides for convenient wall-mounting of amplifiers or electronic equipment.

This Attractive B Series Atlas Sound EZB161-4 4 inch In-Ceiling Loudspeaker with 161-4 Baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The AtlasIED M1000R-W 8" sound masking speaker is a perfect solution for contemporary office spaces with open ceiling designs where sound masking is used to enhance speech privacy. The sleek, round design and low-gloss white finish will blend in nicely with painted ductwork.