AtlasIED

The Atlas Sound HT327 High Power Transformer features high power handling with minimal insertion loss and wide frequency response to provide quality line matching of loudspeakers in high power systems.

The Atlas Sound M1000-W 8" sound masking speaker assembly is designed to accurately reproduce the required spectrum of masking signal into the plenum space. With a majority of America’s workplaces having adopted an open office plan, favoring a labyrinth of cubicles over traditional closed offices, conversational privacy has become an increasingly sensitive issue. A properly designed sound masking system can significantly increase speech privacy and improve the overall work environment.

The Atlas Sound UHT25C-U51-8 8 inch Loudspeaker for Fire Protective Signaling is an 8" diameter single voice coil loudspeakers equipped with dual (whizzer) cone and 10 oz ceramic magnet to deliver extended frequency response with high intelligibility and minimal distortion.

Atlas Sound UHT70C-U51-8 8 inch Loudspeaker for Fire Protective Signaling are 8" diameter single voice coil loudspeakers equipped with dual (whizzer) cone and 10 oz. ceramic magnet to deliver extended frequency response with high intelligibility and minimal distortion.

The Atlas Sound IP-SA incorporates the 8" model C803A coaxial speaker and a square grille finished in white epoxy. The IP-SA is designed to be used in conjunction with an Atlas Sound IP speaker, models I8X(-CK) in applications where two speakers are required but expense is a factor.

The Atlas Sound B161-4 4 inch In-Ceiling Loudspeaker with 161-4 Baffle incorporates the popular Atlas Sound FC104 high performance loudspeaker, recognized for full-range voice and music reproduction. The B161-4 provides wide-angle sound dispersion to achieve desired coverage with fewer loudspeakers in distributed systems.

The attractive Atlas Sound BT720-4-T47 4 inch In-Ceiling Loudspeaker with T720-4 Baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The Atlas Sound SMA15CBRKT-B is a surface mount bracket designed for use with SMA-15 and SMP-15 loudspeaker systems.

The Atlas Sound ZSERIES-RMK is a rack mount kit designed for mounting the Z2-B or Z4-B acoustical systems in an equipment rack. The unit takes up 4 rack units of space and allows access to the front panel controls as well as allowing the unit to tilt open for easy access to internal connections.

The versatile Atlas Sound T3664 tripod microphone stand is adjustable from 36" to 64" to meet the needs of seated and standing instrumentalists and performers.

The Atlas Sound AWV2 2RU Wall Mount System Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 2RU mounting configuration and creates flush mounting options for equipment.

The Atlas Sound AS-120-592 is a 12-inch deep sturdy shelf with wire access that provides for convenient wall-mounting of amplifiers or electronic equipment.

The Atlas Sound PB21X is an extendable microphone boom extending from 25-1/4" to 38-1/2" with a single motion and is suitable for a wide variety of miking applications. It contains a fixed 2 lb counterweight and threaded end cap. Finish is ebony.

The AtlasIED IP-SEST-SD is a straight surface mount enclosure is designed for use only with AtlasIED speaker system models IP-SDM, IP-SDMF, IP-SDH, and IP-SDMFLED. The unit provides an architecturally pleasing appearance with crisp lines that blend well with most building interiors.

This Attractive B Series Atlas Sound EZB161-4 4 inch In-Ceiling Loudspeaker with 161-4 Baffle combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle.

The AtlasIED SM82WOOFER is an 8-inch replacement woofer for the AtlasIED SM82(T) all-weather loudspeaker.

The Atlas Sound AWV3 3RU Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 3RU mounting configuration and creates flush mounting options for equipment.

The AtlasIED M1000R-W 8" sound masking speaker is a perfect solution for contemporary office spaces with open ceiling designs where sound masking is used to enhance speech privacy. The sleek, round design and low-gloss white finish will blend in nicely with painted ductwork.