AtlasIED

The Atlas Sound VPB-1A vandal proof plate mounted call switch is a vandal resistant push switch intercom accessory mounted to a single gang size 12-gauge stainless steel plate. Utilize assembly in conjunction with VPVT and VPCS stations or as a stand-alone signaling device.

The Atlas Sound DLS4 4 inch In-Ceiling Loudspeaker with Press Fit Grill was specially designed for use in low ceiling paging and background music applications such as airports where wide dispersion, high efficiency and ease of installation are required. It is also well suited for use in rail stations, retail stores and hospitality applications.

Designed specifically for installations that may be targeted by vandals, the VP14 system from AtlasIED provides highly intelligible speech reinforcement with the added benefit of extreme ruggedness.

The Atlas Sound E408-250 is specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. It employs a ten-position, non-shorting rotary switch without stop. The attenuation rate is 1.5dB per step. (All other specifications are the same as the AT Series including the UL listing.)

The Atlas Sound FA134T87 4 inch Coaxial In-Ceiling Loudspeaker Driver is a UL listed loudspeaker that handles 25-watts with smooth extended frequency response. The unit's 130° dispersion angle effectively reduces the number of loudspeakers necessary to achieve total coverage in distributed systems with low ceilings.

The Atlas Sound MWOEM is an over the ear mic with a mini-XLR cable designed for use with the MWBPT belt pack transmitter and MWRCVR wireless receiver as part of a wireless microphone system.

The Atlas Sound FA136T47 6 inch Coaxial In-Ceiling Loudspeaker Driver is a high-fidelity loudspeaker that delivers 50-watts with full frequency response and wide dispersion. UL listed assembly is manufactured with highquality materials including a Kevlar, fiber-reinforced, polypropylene woofer.

The Atlas Sound AS-120-592 is a 12-inch deep sturdy shelf with wire access that provides for convenient wall-mounting of amplifiers or electronic equipment.

The Atlas Sound AS-140-592 is a 17-inch deep sturdy shelf with wire access that provides for convenient wall-mounting of amplifiers or electronic equipment.

The Atlas Sound VPCS-2G-2 2-gang intercom system provides superior intelligibility for one or two-way communication in high-security applications. Units are designed for installation in detention, correctional, and institutional facilities. VPCS intercom stations are also ideal for use in high-risk public-access spaces such as hallways, lobbies, and parking garages.

The Atlas Sound M812-S2T7-BX-RS 8" sound masking speaker allows upward sound dispersion and includes two 23.75" (603 mm) channel support rails and the necessary hardware for installation in T-Bar ceilings.

The Atlas Sound ECM-20 Power Distribution Sequencer Raceway was designed to be flexible, incorporating features that allow it to be used in a variety of applications. The sequenced outputs allow equipment to be turned ON or OFF in a particular order.

The Atlas Sound VPCS-3GPB-245 Vandal Proof Intercom Station with Cone Loudspeaker And Call Switch provides superior intelligibility for one or two-way communication in high-security applications. It is designed for installation in detention, correctional, and institutional facilities.

The Atlas Sound FAP40T-B Strategy II Series 4" in-ceiling loudspeakers are designed to provide high performance in a very compact footprint. It appeals to both system designers and architects. Ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.