Atlas Sound

The Atlas Sound AARMK2-5 rack mount kit provides mounting of 1 or 2 (side-by-side) of AtlasIED's AA35 and or PA601 amplifiers in standard 19" equipment rack. Includes all parts and hardware for 1 AA35/AA60, 1 PA601, 2 AA35/AA60, 2 PA601, or a combination of each. 2 connector plates are provided to secure 2 units together, ensuring a secure mount and front panel alignment when 2 units are mounted side-by-side.

The Atlas Sound HPA2602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70 V / 100 V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

The Atlas Sound HPA4202 Dual Channel Commercial Amplifier features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante 2-channel digital audio interface.

This Atlas Sound economy solid steel 2 RU panel is constructed of #14 steel, finished in attractive -052 flat black electrostatic powder coat.

The Atlas Sound ATPLATE-052 attenuator rack mounting plate is perfect for rack mount applications where attenuators are required. The Atlas Sound ATPLATE features 2RU high #14 gauge plate pre-punched to accommodate up to 6 Atlas Sound RM attenuators. (Attenuators not included).

The Atlas Sound AWV2 2RU Wall Mount System Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 2RU mounting configuration and creates flush mounting options for equipment.

The Atlas Sound PA601 Single Channel Power Amplifier features 60 Watts of pure power in a compact package with simple, rear mounted RCA I/O. A unique loudness contour control provides just the right amount of low frequency enhancement for low level listening environments.

The Atlas Sound AWR2W-HR 2RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. It is designed to install within standard 16" stud wall construction, reducing installation time and the need to cut and repair dry wall.

The Atlas Sound AWR2W 2RU Tilt Out Wall Cabinet features convenient access and lock-in security for 19" equipment. This re-designed welded model can be surface or recessed mounted (trim ring included) and include a 3RU panel ­opening above the main bay for connector panels or power distribution.

The AtlasIED ASP-MG2240 is a two-zone sound masking controller with integrated amplification that incorporates technologies for a professional-grade speech privacy system covering up to 7,000 square feet for applications such as conference rooms or medical offices allowing federal HIPPA standards to be met.

The Atlas Sound CR212-NR is a 2U, 9.25" half-rack in-ceiling mounted equipment rack with an integrated AC power pack that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The Atlas Sound CR212 is a 2U, 9.25" half-rack in-ceiling mounted equipment rack with an integrated AC power pack and auto-sensing "on-off" that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The Atlas Sound CR212P-NR is a 2U, 9.25" half-rack in-ceiling mounted equipment rack with an integrated AC power pack and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The 2'x2' Atlas Sound CR222-NR is a 2U, 19" wide in-ceiling mounted equipment rack with an integrated AC power pack that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The Atlas Sound CR212P is a 2U, 9.25" half-rack in-ceiling mounted equipment rack with an integrated AC power pack, auto-sensing "on-off" and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The 2'x2' Atlas Sound CR222-NR is a 2U, 19" wide in-ceiling mounted equipment rack for with an integrated AC power pack and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The 2'x2' Atlas Sound CR222 is a 2U, 19" wide in-ceiling mounted equipment rack with an integrated AC power pack and auto-sensing "on-off" that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The 2'x2' Atlas Sound CR222 is a 2U, 19" wide in-ceiling mounted equipment rack for with an integrated AC power pack, auto-sensing "on-off" and a projector pole adapter that allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum.

The Atlas Sound HPA602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70V / 100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads

The Atlas Sound HPA1302 is a dual channel 1300W commercial amplifier designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads.

The AtlasIED HPA1204 High Power Amplifier "HPA" Series is designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads. The HPA is compact and lightweight in comparison to other models delivering similar power levels.

The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.