AtlasIED Amplifiers

The Atlas Sound TSD-PA20VG Mono Power Amplifier is a cost effective alternative for small projector systems as it can be used with as many as (16) 25/70/100V ceiling speakers (tapped at 1W each), plus the extremely small footprint allows for easy mounting.

The Atlas Sound TSD-DA28 2x8 Distribution Amplifier is designed to provide clean, isolated signal distribution locally or to remote locations. The unit allows two independent balanced line level source inputs to be distributed to eight isolated variable outputs making it a perfect solution for applications including convention centers, houses of worship, restaurants/sports bars and industrial facilities.

The Atlas Sound PA40G Single Channel Power Amplifier provides 40W into a 70.7V/100V line and has a balanced line level input via phoenix connector and a summing unbalanced RCA input.

The Atlas Sound TSD-PA252G Two Channel Power Amplifier is a reliable, cost effective 4Ω stereo amplifier well suited for higher power amplification requirements. Output is 25W per channel at 4Ω or 50W bridge mono at 8Ω. Input is via balanced stereo phoenix style and unbalanced RCA connectors.

The Atlas Sound PA60G Single Channel Power Amplifier is small, compact, and engineered for efficiency and reliability. It is the perfect choice for paging or background music (BGM) systems, small to medium speech privacy systems, or any applications where distributed audio is required.

The Atlas Sound PA601 Single Channel Power Amplifier features 60 Watts of pure power in a compact package with simple, rear mounted RCA I/O. A unique loudness contour control provides just the right amount of low frequency enhancement for low level listening environments.

The Atlas Sound DPA-102PM Networkable Power Amplifier features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound.

The Atlas Sound PA1001G 100W single channel pole-mount amplifier into a 70V or 100V distributed system gives the power to meet most amplifier demands and features an ultra compact design.

The AtlasIED ASP-MG2240 is a two-zone sound masking controller with integrated amplification that incorporates technologies for a professional-grade speech privacy system covering up to 7,000 square feet for applications such as conference rooms or medical offices allowing federal HIPPA standards to be met.

The Atlas Sound HPA602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70V / 100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads

The Atlas Sound DPA404 multi-channel power amplifier delivers four channels x 100W @ 70 or 100-volts or 4 x 75W @ 8-ohm. It is designed for multi-zone distributed audio systems used in live sound reinforcement and building/emergency communication systems.

The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.

The Atlas Sound HPA1302 is a dual channel 1300W commercial amplifier designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads.

The AtlasIED HPA1204 High Power Amplifier "HPA" Series is designed for use in both commercial 70V/100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads. The HPA is compact and lightweight in comparison to other models delivering similar power levels.

The AtlasIED DPA1202 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The Atlas Sound DPA804 multi-channel power amplifier delivers four channels x 200W @ 70 or 100-volts or 4 x 150W @ 8-ohm. It is designed for multi-zone distributed audio systems used in live sound reinforcement and building/emergency communication systems.

The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The AtlasIED TitanONE T112 Smart Mainframe Power Amplifier provides the latest signal automation, processing and amplification technologies in one modular solution. The modular design allows up to 7 TitanONE Series power amplifier cards to be easily inserted into the mainframe.