- Description
Details
Atlas Sound IED1522AIOLR CobraNet Audio I/O Module with Logic and Relays
The 1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The 1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio. The 1522AIOLR is perfect for applications requiring additional inputs or outputs to an existing CobraNet system.
- Features
Features
Inputs:
- Two balanced analog microphone/line inputs
- Software adjustable, non-volatile, input levels from –50 to +24dBu
- -90dB THD+ N
- Software selectable 48V phantom power individually available on all inputs
Outputs:- Two balanced analog line outputs
- Software adjustable, non-volatile output levels from -10 tp +24dBu
GPIO:- Four opto-isolated inputs
- Four normally open relay isolated outputs
CobraNet:- Redundant CobraNet
- Separate CobraNet channels of CobraNet channels used for in and out
DSP:- Programmable delay up to 10 seconds on each audio output
- 5 band parametric equalizer bands (high-pass, low-pass, peaking, notch)
- Compander/Limiter on each input
- Level control
Power:- Power over Ethernet (PoE) 802.3af compliant on primary Ethernet connection
- Specification
CobraNet Input/Output Type 100BaseT Ethernet Connector Type RJ-45 Sample Rate 48kHz Latency 1.33, 2.66 or 5.33 ms Microphone/Line Input Type Balanced Connector Type Terminal Block Input Level -50 to +24dBu in 1dB increments Input Impedance 5kOhm balanced Sample Rate 48kHz Frequency Response 20Hz to 20kHz +/-3dB Analog Output Type Balanced Connector Type Terminal Block Output Level -10 to +24 dBu in 1dBu steps Load Impedance -10 to +14dBu:600 Ohms or greater
15dBu to +24dBu: 2kOhms or greaterDynamic Range >100dB THD+N < -88dB Sample Rate 48kHz Frequency Response 20Hz to 20kHz +/-3dB - Documents
Documents
- Reviews
Write Your Own Review