Biamp Tesira Power Amplifier AMP-A460H 4-Channel 60W with 70V and 100V Outputs

Home /
Shop By Brand /
Biamp Systems /
Biamp Tesira Power Amplifier AMP-A460H 4-Channel 60W with 70V and 100V Outputs

Description

Details

The Biamp AMP-A460H can be placed in a conference room with virtually no audible noise. The ability to bridge channels gives even more power and flexibility to the AMP-A460H. This amplifier can be used in 70/100V constant voltage applications, making it extremely flexible for many applications. Every AMP-A460H ships with a mounting kit for rack mounting a single unit or two units side-by-side. The AMPA460H is a perfect pairing for TesiraFORTÉ®-equipped conference rooms or applications where office or classroom sound reinforcement is needed.

In many conference rooms, while a large digital amplifier would be effective, it would provide more power than the room will ever use. That's why we created the Biamp AMP-A460H amplifier. This 4-channel, half-rack amplifier is a perfect match for conference rooms equipped with TesiraFORTÉ devices, and requires no additional software to install. The flexible AMP-A460H is compact and energy efficient, and includes the ability to bridge channels and support constant voltage systems. It’s also quiet enough to be placed in the room or mounted beneath a table without disrupting conferencing activities. Prefer to keep your amplifiers out of sight? The AMP-A460H ships with a mounting kit so it can be housed in a rack.

Features

Features

Four channels; 60W per channel
Bridgeable channels
D-Class amplifier topology
Three manual switches provide: constant voltage operation, bridging channels, and a high-pass filter option
Supports both 70V and 100V Constant Voltage Systems
LED indicators for each output channel
Rack mountable; includes mounting kit
No additional software needed
CE marked, UL listed, and RoHS compliant
Covered by Biamp Systems’ five-year warranty

Specification

Number of Channels	4
Maximum Rated Output, Single Channel Driven, 4Ω, 8Ω	60W
Maximum Rated Output, Bridged, 4Ω, 8Ω	120W
Maximum Rated Output, Bridged, 70V/100V	120W
THD + N (20Hz-20kHz, at Rated Power)	<0.3% (All Power Ratings at Rated Power), 20 Hz to 20kHz
Frequency Response	+/-1 dB 20 Hz to 20kHz E
Dynamic Range	100 dB, 8 ohm Reference, 20 Hz to 20 kHz, Unweighted
Input Sensitivity	0 dBu at Rated Power 8 ohm and 70V Modes +1.6 dBu 100Vmode
Amplifier Topology	Class D
Accessories Included	Rack mount kit
Power	100-240VAC, 50/60Hz
Cooling	Convection
Rear Panel Indicators	Per Channel Signal/Per Pair Protection Mode/Per Channel Limiting Indicator
Rear Panel Controls	80 Hz HPF–on or off Per Pair Mode Selection–standard or Bridged Per Pair Constant Voltage Selection Per Pair (Bridge Mode Only)
Environmental	Ambient Operating Temperature: 32-104° F (0-40° C) Humidity: 95%, Non-Condensing
Compliance	UL and C-UL listed (USA and Canada) FCC Part 15B (USA) CE Marked (Europe) RCM (Australia) EAC (Eurasian Customs Union) Pending RoHS Directive (Europe) CCC (China) Pending KCC (Korea) Pending
Dimensions (H x W x D)	1.7" (44 mm) x 8.7" (221 mm) x 10.47" (266 mm)
Weight	4.2 lbs (1.91 kg)

Documents