Bogen Communications

Bogen's A8 8" All-Weather Loudspeaker sets the standard for smooth, accurate sound, attractive appearance and rugged construction. Attractively styled, each model is engineered for both indoor and outdoor applications. The A8 model features a high-output 2-way design for larger spaces such as clubs, auditoriums, and theme parks.

The Bogen A12 is a compact, high-powered, all-weather speaker that projects well in open spaces like theme parks, sports fields, and plazas.

Bogenʼs A8T 8 inch All-Weather Loudspeaker sets the standard for smooth, accurate sound, attractive appearance and rugged construction. Attractively styled, each model is engineered for both indoor and outdoor applications. The A8T model features a high-output 2-way design for larger spaces such as clubs, auditoriums, and theme parks.

The Bogen Communications C35 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

The Bogen Communications ANS501 ambient noise sensor system is designed to monitor continuously changing ambient noise levels and electronically adjust the level of a page announcement and/or background music so intelligibility is maintained.

Bogen's V35 Power Vector Modular Amplifier offers 35 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.

The Bogen Communications TPU35B is a wall-mounted telephone paging amplifier rated at 35 watts, that can also be rack-mounted. This TPU amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page.

The Bogen Communications C100 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

The Bogen PCMSYS3 is a pre-assembled and tested 3-zone PCM2000 system with a PCMPS2 power supply. The system includes the PCMTIM Telephone Interface Module, PCMCPU Central Processor Module, PCMZPM 3-Zone Paging Module, and PCMPS2 System Power Module.

Bogen's V60 Power Vector Modular Amplifier offers 60 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.

Bogen's V100 Power Vector Modular Amplifier offers 100 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. It also includes a motorized master volume control that can be controlled using a remote volume control panel.

The Bogen Communications TPU100B is a wall-mounted telephone paging amplifier rated at 100W and can also be rack-mounted. The TPU amplifiers permit paging from telephone and/or microphone, music input through an RCA jack or screw terminals, and voice-activated, variable level, music mute with fade back after page.

Bogen's V150 Power Vector Modular Amplifier offers 150 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

The Bogen GA-MLE3-E32 is used to designate the Atlas Sound® explosion-proof compression driver/horn assembly Models MLE-3T and MLE-32. These assemblies are engineered for high-efficiency voice and electronic signal communication in hazardous areas.

Bogen's V250 Power Vector Modular Amplifier offers 250 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

The Bogen Communications TPU250 is a wall-mounted telephone paging amplifier rated at 250 watts, that can also be rack-mounted. This TPU amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page.

The Bogen MB8TSL is an all-steel surface-mounted speaker enclosure featuring an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The speakers are designed primarily for wall mounting, with front face angled downward by 12.5°.

The Bogen Communications GDU150 is a dynamic, uni-directional gooseneck microphone that features a durable all-metal case with a non-glare black finish. It has an 18" long, fully flexible gooseneck body with an integral XLR mounting base. The GDU150 has a silent push-on/push-off talk switch. It provides outstanding speech intelligibility, feedback rejection, user sound isolation, and a low sensitivity to breath pop noise. The GDU150 has a superior shock-mount system to reject handling and noise transmission.