Bose

The Bose® PS602P is a 2-channel portable amplifier that allows its total 600 watts to be shared across both outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship. Learn More

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship.

The RoomMatch DeltaQ Large Array Rigging Frame is for use with 4 to 8 RoomMatch full-range or subwoofer modules in overhead suspended arrays.

An accessory installation bracket that allows a single RoomMatch full-range array module loudspeaker to be mounted on flat surfaces, such as building walls or ceilings.

The Bose RMGSBK Ground Stack Base Kit can be used with up to three (3) RoomMatch modules for ground stack arrays.

Converts RoomMatch RMGSBK ground stacked arrays into a movable configuration.

Attaches to subwoofer module and mounts one or two RoomMatch full-range modules, allowing pitch angle adjustment from 0 to 30 degrees down pitch (differs by module vertical coverage pattern). Complete pitch bracket is formed by assembly of pitch plate that attaches to subwoofer module and mounting bar that attaches to RoomMatch full-range modules.

Provides subwoofer-to-subwoofer module connection for ground stack arrays.

Set of 4 quick-release pins designed to replace the graded M10 fasteners for module-to-module connections. May be used with RoomMatch® full-range or subwoofer modules.

Use with bottom-most array module to provide third-point suspension to building structure to allow more extreme downward angle of arrays than possible from 2-point, gravity-hang suspension.

An accessory side-plate rigging kit for the RoomMatch® RMS215/RMS218 subwoofer module to allow integration of subwoofer modules in RoomMatch arrays.

Optional accessory that installs in the input panel of RoomMatch full-range modules to allow attenuation of the bottom-3 compression drivers as compared to the top 3 drivers. This allows for more uniform sound pressure levels for specific module configurations and coverage areas.

The Bose ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system.