Bose

The RoomMatch DeltaQ Large Array Rigging Frame is for use with 4 to 8 RoomMatch full-range or subwoofer modules in overhead suspended arrays.

An accessory installation bracket that allows a single RoomMatch full-range array module loudspeaker to be mounted on flat surfaces, such as building walls or ceilings.

The Bose® WCB-5 U-bracket is used for wall/ceiling surface mounting a Panaray® 502® A loudspeaker. It provides ± 90˚ range. Designed for indoor use.

The Bose MB4 Wall-Mount U-Bracket is for mounting the Panaray MB4 modular bass loudspeaker.

The Bose FreeSpace DXA 2120 Digital Mixer Amplifier provides signal processing, mixing, routing, paging and two-channel amplification for installed applications. Each of the two output channels delivers 120 watts at 4 ohms or 100 watts for 70/100-volt applications.

The Bose Professional PowerMatch PM8500 8-channel power amplifier is an 8 x 500 watts at 4 ohms configurable power amplifier offering multiple channels and power options, an integrated audio DSP, front panel interface and USB connection.

Bose FreeSpace Square Grille is designed for use with DS flush-mount loudspeakers and recommended for installations in which a square grille suits the architecture and décor.

The Bose® FreeSpace® DS 16S is entry-level, full-range, surface-mount loudspeakers designed for background music and speech reproduction in a wide range of installed applications.

The Bose® Panaray® 302™ A loudspeaker is a full-range, two-way loudspeaker designed primarily for background/foreground music. It is appropriate for both indoor and outdoor applications such as, restaurants and bars, conference centers, foreground retail, theme parks, indoor arenas, outdoor shopping centers.

The Bose FreeSpace ZA 190-HZ zone amplifier is designed to provide basic amplification and sound system expansion when using front-end signal processing from products such as the FreeSpace IZA 250-LZ / IZA 190-HZ integrated zone amplifiers, the FreeSpace 4400 business music system and ControlSpace engineered sound processors.

The Bose® FreeSpace® ZA 250-LZ zone amplifier is designed to serve as a standalone amplification system or expansion sound system that utilizes front-end signal processing from products such as FreeSpace IZA 250-LZ / IZA 190-HZ integrated zone amplifiers, the FreeSpace 4400 business music system and ControlSpace® engineered sound processors.

The Bose Volume Control User Interface is a wall mountable plate with volume control knob.

The Bose® FreeSpace® IZA or ZA Bose Volume Control User Interface is an elegant, easy-to-use, wall-mounted volume controller. Its simple interface fits in a standard 2-gang electrical box and is suitable for use in controlling the volume in a single room or zone.

The Bose® RoomMatch® RMS215 Subwoofer Module Loudspeaker is designed primarily to extend the low-frequency response of Bose RoomMatch® arrays to 40 Hz. It features dual Bose LF15 15-inch high-excursion woofers, with a proprietary port design that minimizes distortion and improves perceived transient impact.

The Bose RMGSBK Ground Stack Base Kit can be used with up to three (3) RoomMatch modules for ground stack arrays.

Converts RoomMatch RMGSBK ground stacked arrays into a movable configuration.

Attaches to subwoofer module and mounts one or two RoomMatch full-range modules, allowing pitch angle adjustment from 0 to 30 degrees down pitch (differs by module vertical coverage pattern). Complete pitch bracket is formed by assembly of pitch plate that attaches to subwoofer module and mounting bar that attaches to RoomMatch full-range modules.

Provides subwoofer-to-subwoofer module connection for ground stack arrays.

Use with bottom-most array module to provide third-point suspension to building structure to allow more extreme downward angle of arrays than possible from 2-point, gravity-hang suspension.

An accessory side-plate rigging kit for the RoomMatch® RMS215/RMS218 subwoofer module to allow integration of subwoofer modules in RoomMatch arrays.

Optional accessory that installs in the input panel of RoomMatch full-range modules to allow attenuation of the bottom-3 compression drivers as compared to the top 3 drivers. This allows for more uniform sound pressure levels for specific module configurations and coverage areas.

The ControlSpace WP22BU-D Dante wall plate is a cost effective multi-I/O wall box. The WP22BU-D features a balanced mic/line XLR input and a balanced XLR line output. Two RCA line-level inputs and a 3.5 mm TRS line-level input complete the available inputs.

The ControlSpace WP22B-D Dante audio Interface is a cost effective multi-I/O wall box. The WP22B-D features two balanced mic/line XLR inputs and two balanced XLR line outputs.

The Bose RoomMatch Utility RMU208 small-format sound reinforcement loudspeaker is intended for use in high-quality foreground music, under-balcony, zone fill, and vocal-range floor monitor applications.