- Description
Details
The ASB7118 woofer features neodymium magnet, dual voice coils and dual gaps, JBL’s exclusive Vented Gap Cooling™ and ultra robust composite cone for high excursion and extra long life. Woofer iscapable of a peak-to-peak maximum excursion of 89 mm (3.5").
The enclosure is constructed of multiply hardwood coated in JBL’s rugged DuraFlex finish and is heavily braced to maximize low-frequency performance. The rectangular enclosure is fitted with sixteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.
The ASB7118 is part of JBL’s AE Series, a versatile family of loudspeakers intended for a wide variety of applications.- Features
Features
- 2269H 18" Differential Drive dual voice coil dual gap, neodymium magnet transducer
- 2000 watts continuous pink noise
- 8000 watts peak power handling capacity
- Ultra Long Excursion
- Large vent area for high output with low distortion
- For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products
- Specification
Frequency Range (-10 dB) 22 Hz - 1 kHz Frequency Response (± 3 dB) 34 Hz - 1 kHz Transducer Power Rating 2000 W (8000 W peak), 2 hrs Long-Term System Power Rating 1200 W (4800 W peak), 100 hrs Maximum SPL (1m) 25 Hz - 200 Hz: 129 dB-SPL cont av. (135 dB peak) System Sensitivity 25 Hz - 200 Hz: 96 dB-SPL, 1W (2.83V) @ 1m Nominal Impedance 8 ohms Low Frequency Driver 1 x 2269H, 460 mm (18 in) dia. 100 mm (4 in) Dual Coil Gap neodymium Differential Drive® VGC™ driver Enclosure Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood Suspension Attachment 16 points (4 top, 4 bottom, 4 each side) M10 threaded hardware Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through Environmental Specifications Mil-Std 810; IP-x3 per IEC529 Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers Dimensions (H x W x D) 21.5" (546 mm) x 22" (560 mm) x 32.1" (815 mm) Net Weight 94.5 lbs (42.9 kg) - Reviews
Write Your Own Review