- Description
Details
The NEXO DTDAMP4X1.3 is a 4-channel, 1U rack-mounting power amplifier with a maximum power output of 4 x 1300 watts (4 x 4 ohms), developed to perfectly match the NEXO DTD Controller. Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems.
The DTDAMP4X1.3 partners perfectly with the touring and install versions of the DTD Controller to create a compact, lightweight, intelligent powering solution that is easy to configure. When used with the NEXO DTD controller, the DTDAMP4X1.3 is the perfect solution for "dry hire" or where the user has limited knowledge to still allow the best possible result from the NEXO speaker system. Once the NEXO Speakers are selected in the DTD Controller, you can use the DTD+DTDAMP system in most situations without any further adjustments to the settings.
The DTDAMP offers all the sensor and protection that are mandatory for a professional touring amplifier, such as mains over/under voltage, over-voltage or DC output on each channel, short circuit etc. The variable speed cooling system will assure a quiet and cool amplifier while the front to back cooling system ensures compatibility inside racks where both DTDAMP and the NXAMP are used together in large installations.
- Features
Features
- Perfect match for the NEXO speakers supported by the NEXO DTD Controller
- High-efficiency Switch Mode power supply and Amplifier channel design
- Channels can be independently bridged two by two
- 4 inputs on XLR connectors and 4 outputs on SP4 (Speakon) connectors
- Extensive protection (mains over/under voltage, temperature, DC outputs, current and voltage peak limiters, variable speed cooling system)
- Specification
Number of Channels 4 x amplifiers channel, 2 by 2 bridgeable Maximum Output Voltage (No Load) 4 x 135 volts Maximum Output Power (4 x 8 Ohms) 4 x 750 watts Maximum Output Power (4 x 4 Ohms) 4 x 1300 watts Maximum Output Power (2 Bridge x 8 Ohms) 2 x 2600 watts Frequency Response 20 Hz - 20 kHz (+/- 0.5 dB) Input Impedance 10 kOhms Input Sensitivity +8 dBU Nominal Gain 32 dB Dynamic Range (A-Weighted) > 110 dB Analog Audio Inputs 4 x balanced analog inputs on XLR Power Outputs 4 x SP4 (Speakon) outputs Link Switch To use same XLR input for 2 x adjacent channels Mains Sockets IEC C14 Inlet with secure lock Switch and Knobs Mains On/Off switch and volume control knob per channel View Meters 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier Status Amp Ready and Temperature indicator per channels pairs Mains Voltage Factory set for 120 volts of 230 volts mains operation Power Consumption (Idle) 65 watts Power Consumption (1/8 max. / 4 Ohms) 900 watts Power Consumption (1/4 max. / 4 Ohms) 1800 watts Dimensions (H x W x D) 1.7" (44 mm) x 18.9" (480 mm) x 14.6" (370 mm) Weight 16.5 lbs (7.5 kg) - Documents
Documents
- Reviews
Write Your Own Review