Radio Design Labs (RDL)

The RDL D-XLR2F Dual XLR 3‐pin Female Jacks on Decora Wall Plate ‐ Solder type, for use with WB-1U single and WB-2U double universal wall mounting box.

The RDL PS-24AS is a 24 VDC switching power supply, North American AC plug, 500 mA, dc Plug.

The RDL PS-24KS is a 24 Vdc Switching Power Supply, North American AC Plug, 1 A, dc Plug.

The RDL Model PS-24KX is a 24 VDC Switching Power Supply, Interchangeable AC Plug, 1 A, dc Plug for FP-PA amplifiers.

The RDL D Series-J3 is a complete audio input panel assembly and may be mounted directly into cabinets or most standard US single gang electrical boxes.

The RDL TX-J2 is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors.

The RDL STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed.

The RDL AV-HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold-plated phono jacks. The AV-HK1 is supplied with two adapter cables to facilitate connecting with products that use mini-plugs and jacks.

The TX-8A is the ideal choice in many applications requiring superior quality transformer coupling between the output of a 4 or 8 Ohm power amplifier and the input of an audio mixer or amplifier. A front-panel LEVEL control allows the output to be adjusted for -10 dBV or +4 dBu over a wide range of amplified power levels.

The RDL ST-PA2 features a single, unbalanced audio input, a gain control, and two outputs. The first output is designed to deliver a clean 2 watts RMS into an 8 Ω speaker.

The DB-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line-level audio sources to feed a mono balanced (or unbalanced) audio line.

The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. There is no voltage on the mic output terminals. Therefore, the ST-MPA24 can convert any existing mic input into a phantom powered input.

The RDL ST-PA6 represents the second generation of RDLs® breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 Watts of power for a price you would expect to pay for 3 Watts.

The TX-LC2 is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed a balanced (or unbalanced) audio line.

The RDL ST-RX2 has a single line‑level audio input and two line‑level audio outputs and is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent or removable mounting nearly anywhere or it may be used with RDL racking accessories.

The RDL STM-1 is a low-cost quality microphone preamplifier designed for use in commercial sound and broadcast applications. The compact size makes it ideal where a larger or heavier preamp cannot be used.

The RDL STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line.