RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface

Home /
Shop By Brand /
Radio Design Labs (RDL) /
RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface

More Views

RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface

Part # DB-BT1A

Model # DB-BT1A

The RDL D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver.

Availability:

List Price $515.81

Pro Acoustics Price Price $386.86

Your Savings $128.95 (25%)

Qty:

Share with
Add to Wishlist

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface

The RDL D-Series BT1A modules are Bluetooth audio receiving modules compatible with RDL Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver.

If set for stereo operation, an additional Format-A source (set to Pair A) may be daisy-chained with the D SERIES-BT1A to a three-pair Format-A receiver. If set for mono operation, up to three D-Series BT1A modules may be daisy-chained to a single three-pair Format-A receiver. Connections between Format-A modules and Format-A receivers use standard CATx cable with RJ45 connectors.

The D-Series modules are powered from the Format-A receiver. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.

Features

Features

Bluetooth audio input for installed sound system
Intuitive single button pairing with LED status indication
Special software not required for module setup
Customize the module ID name and programming password through the Bluetooth connection
Sends received Bluetooth audio to RDL Format-A receivers
Mono summed or stereo audio input mode is switch-selectable on rear panel
Rear-panel switch selects which RJ45 pair (A, B or C) is fed in mono summed mode
Daisy-chain up to three D SERIES-BT1A modules to one Format-A receiver in mono mode
Remotely powered through twisted pair cable
Signal and power pair pass-through on RJ45 jacks

Specification

Output	RDL Format-A (RJ45)
Format-A Input	RJ45 LOOP IN
Format-A Signal Pair Used	A, B, or C (summed mono mode, rear-panel switch-selectable) B and C (stereo mode, pair A pass through)
Frequency Response	20 Hz to 20 kHz (± 0.5 dB)
THD+N	< 0.1%
Noise below -20 dBFS	< -70 dB
Crosstalk (channel to channel)	< 70 dB
Audio Operating Levels	-20 dBFS = +4 dBu (balanced), nominal
Ambient Operating Environment	0° C to 40° C
Power Requirement	24 Vdc @ 100 mA (through RJ45)
Dimensions (H x W x D)	4.11" (104.4 mm) x 1.73" (43.9 mm) x 1.62" (41.1 mm)
Weight	0.45 lbs (0.2 kg)

Documents