- Description
Details
MX400 Series microphones are miniature gooseneck-mounted electret condenser microphones designed primarily for speech and vocal pickup. Microflex Standard Gooseneck microphones provide the added length and flexibility needed for speakers in environments like lecterns, pulpits, and courtrooms. It includes a locking flange mount for permanently securing the microphone on lecterns, pulpits, or conference tables.
All models include a preamplifier and are available with Interchangeable cartridges provide the right polar pattern for every application. It includes a snap-fit foam windscreen and the shock mount provides over 20 dB isolation from surface vibration noise.- Features
Features
- Wide dynamic range and frequency response
- Interchangeable cartridges
- Interchangeable cartridges that provide an optimal polar pattern choice for each application
- Shock mount provides over 20 dB of isolation from surface vibration noise
- Snap-fit foam windscreen
- 10' side (or bottom) exit cable
- RF filtering
- Specification
Frequency Response 50 to 17,000 Hz Output Impedance 180 ohms actual (EIA rated at 150 ohms) Sensitivity (At 1,000 Hz, open circuit voltage) -35.0 dBV/Pa (17.8 mV) Maximum SPL (1 kHz at 1% THD, 1 k ohm load) 124.2 dB Equivalent Output Noise (A-weighted) 28.0 dB SPL Signal to Noise Ratio (referenced at 94 dB SPL) 66.0 dB Dynamic Range at 1 k ohm load 96.2 dB; 100 dB at 0 gain Common Mode Rejection 45.0 dB minimum Preamplifier Output Clipping Level (1% THD) -6.0 dBV (0.5 V); -12 dBV at 0 gain Polarity Positive sound pressure on diaphragm produces positive voltage on pin2 relative to 3 of output conn. Power Requirements 11 to 52 Vdc phantom, 2.0 mA Environmental Requirements Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F); Relative Humidity: 0 to 95% Dimensions (gooseneck) 18" (457.2 mm) Weight 2 lbs (0.90Kg) - Reviews
Write Your Own Review