- Description
Details
Connecting the N-8600MS to an IP network (LAN or WAN) permits hands-free or handset conversation of high sound quality to be made between the N-8600MS and intercom stations connected to the IP Intercom Exchange, or between the N-8600MS units. Besides, the N-8600MS can be used in conjunction with the Multi Interface units through a network. Power can be supplied from the PoE (Power over Ethernet) switching hub. (In this case, an AC adapter is not required.) This station can be mounted to the wall using an optional YC-280 wall mounting bracket.
- Features
Features
- Clear conversations between stations over wide band
- Hands-free duplex conversation possible between stations
- Can be connected to an existing local area network (LAN) or wide-area network (WAN)
- Dedicated software program enables centralized control with a personal computer
- System maintenance can also be performed with a personal computer and Internet browser
- Connecting the station to a PoE (Power over Ethernet) switching hub eliminates the need for an AC adapter
- Specification
Power Source Power supply device that complies with IEEE802.3af standard or12 V DC(supplied from the AC adapter Power Consumption Use of the AC adapter (12 V DC): 2.5 W (station only)Use of the PoE (48 V DC): 3 W Speech Method Hands-free or handset conversation Audio Frequency Range 300 Hz - 7 kHz Hands-free Speaker 5.7 cm (2.24) cone-type Microphone Omni-directional electret condenser microphone Handset Receive path: Dynamic type, Send path: Electret condenser microphone Headset Terminal Speaker 150 , †3.5 mm (0.14) mini jack" Microphone -49 dB*, †3.5 mm (0.14) mini jack" External Speaker Terminal Maximum output 0.5 W, 8, screwless connector (2 pins) Network Section Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation) Network protocol TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP Audio packet transmission system Unicast, Multicast Number of paging destinations Unicast (max. 16), Multicast (max. 191) Connector LAN: RJ45 connector (PoE compatible) Voice sampling frequency 16 kHz, 8 kHz (controllable on the software) Quantifying bit number 16-bit Voice encoding method Sub-band ADPCM, Cryptosystem Voice packet loss recovery Silence insertion Audio delay time 80 ms, 320 ms (controllable on the software) Display LCD : Alphanumeric characters (16 characters— 2 lines) Indication Status lamp Installation Method Desk/Surface mounted master station(When mounting to the wall, use the optional YC-280.) Operating Humidity 90 %RH or less (no condensation) Finish Body, Handset: ABS resin, gray Dimensions 148 (W) × 208 (H) × 70.5 (D) mm (5.83" × 8.19" × 2.78") (excluding a curl cord section) Weight 1.7 lbs. (770 g) - Reviews
Write Your Own Review