- Description
Details
The Yamaha XMV Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments. The newly developed Double Power Mode function effectively doubles the output power of selected channels in order to drive speakers with higher output power. This means that speakers with varying output capacities can be powered simultaneously by the same amplifier, adding flexibility to system design and configuration.
XMV amplifiers feature an innovative, new, patent pending circuit that improves the already highly efficient Class D circuit topology, bringing the efficiency level of the amplifier's output stage up to over 90%. This is achieved by automatically switching the circuit to match the corresponding output voltage. In high-impedance connections, both 70V and 100V operation can be achieved since the circuit is already capable of operating in high voltages.
XMV amplifiers come equipped with either the newly developed YDIF digital audio format, or Audinate’s digital audio network Dante. YDIF allows easy setup with the use of Ethernet cables while Dante models can be used for larger venues where long distant cabling is required.
Automatic protection functions are an essential part of the XMV Series' design, ensuring peak performance and reliable operation in less than ideal situations. Low load impedance, overcurrent, and overheating can all damage vital amplifier components and threaten their ability to function effectively.
XMV power amplifiers also feature a new switching power supply equipped with Power Factor Correction, which ensures harmonic control and decreases the amount of current draw dramatically, yet still maintains the same output power. This makes circuit breakers less prone to shutting down, as well as eliminating the need for thicker, heavier cables or a larger, more powerful system.- Features
Features
- Four-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously
- 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels
- The newly developed Double Power Mode function effectively doubles the output power of selected channels
- Equipped with YDIF digital audio format for simple and fast system configuration
- Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series
- An innovative circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of the amplifier's output stage up to over 90%
- Features a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount of current draw while maintaining the same output power
- Powerful, intelligent protection features for more reliable operation
- Specification
Output Power 1kHz, THD+N = 1% 4Ω 4x 280W 8Ω 4x 280W 4Ω/ Double Power Mode 2x 560W 8Ω/ Double Power Mode 2x 560W Output Power High impedance 100V 4x 250W / 40Ω 70V line 4x 250W / 20Ω Voltage Gain RL=8Ω 31.7dB RL=8Ω / Double Power Mode 34.7dB 100V 38.2dB 70V 35.2dB Input Sensitivity (RL=8Ω) +4dBu S/N Ratio (A-weighted) ≥ 100dB Power Consumption 1/8 power (4Ω pink noise) 250W Idle (4Ω) 37W Standby 18.5W THD+N (1kHz, half power) ≤ 0.1% Frequency Response RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz: 0dB, ±1.0dB Crosstalk 1kHz, half power, 8Ω, Att. max, input 150Ω shunt: ≤ -60dB Maximum Input Level +24dBu Input impedance 20kΩ (balanced), 10kΩ (unbalanced) Connectors Analog Input 2x Euroblock (6P, balanced) Digital Input / Output 2xRJ45 (YDIF IN / OUT) Speaker Output 4 pairs x Barrier strip Network 1x RJ45 Remote, Fault Output 1x Euroblock (3P) AC IN 1x AC Inlet Protection circuit Load Protection POWER switch on/off: Output mute
DC-fault: Power supply shuts down, Clip limitingAmplifier Protection Thermal: Output mute (heatsink temp ≥90°C)
(Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C)
Integrated power: Gain reduction (Restored automatically)Cooling Fan 2x 3-Speed fan, front-to-back airflow Dimensions (H x W x D) 3.5" (88 mm) x 18.9" (480 mm) x 16.6" (422 mm) Weight 17.9 lbs (8.1 kg) - Reviews
Write Your Own Review