CAD Audio WX1000HH 100-Channel UHF Wireless Handheld Microphone System (510 - 570 MHz)
Usually arrives in 5-9 business days.
The CAD Audio WX1000BP UHF wireless bodypack microphone system is designed for wireless speech, vocals, and instruments. Operating in the 510-570 MHz band, it features 100 selectable channels, auto-scan, IR synchronization, and up to 295 ft of range. The system includes headworn and lavalier microphones and a guitar cable, with approximately 12 hours of transmitter operation using two AA batteries.
The WX1000BP is a frequency-agile UHF wireless bodypack microphone system that operates in the 510-570 MHz frequency band and features 100 selectable frequencies for clear signal reception. Auto-scan and IR sync functions make setup and channel changing easy, while the system supports operation of up to 20 compatible systems simultaneously under suitable RF conditions. The transmitter provides approximately 12 hours of operation using two AA batteries, with battery level information displayed on both the transmitter and receiver to indicate when replacement batteries are needed.
The CAD Audio WX1000BP features rugged, all-metal receiver construction and includes rackmounting hardware and an antenna relocation kit for flexible installation. The system includes a headworn microphone, lavalier microphone, and guitar/instrument cable, allowing the bodypack transmitter to be used for wireless vocals, speech, or instruments. The microphones and instrument cable connect individually to the bodypack transmitter, which operates with the included single-channel wireless receiver. The receiver provides a balanced XLR output and a 1/4" unbalanced output for connection to compatible audio equipment. The WX1000BP is backed by a 2-year manufacturer warranty.
| WX1000 Receiver: | |
|---|---|
| Receiver Type | Single-Channel UHF Wireless Receiver |
| Frequency Response | 30 Hz - 18 kHz |
| Frequency Range | 510 MHz - 570 MHz |
| Frequency Mode | FM |
| Channels | 100 Selectable RF Frequencies |
| Signal-to-Noise Ratio | >85 dB |
| Harmonic Distortion | <0.5% |
| Dynamic Range | >100 dB |
| Delay | <3 ms |
| Operating Range | 278' (85 m) in Open Area 196' (60 m) Indoors |
| Audio Output | XLR Balanced Output 1/4" (6.3 mm) Unbalanced Jack |
| Antenna Plug | 1x TNC, 50 ohms |
| Receiver Display and Controls | LCD Display RF Peak Indicator AF Peak Indicator Channel Display Frequency Display Mute Indicator Frequency Selection Power On/Off |
| Power Requirements | DC 12V, 1A |
| Receiver Dimensions (H x W x D) | 1.7" (43 mm) x 9.5" (241 mm) x 5.9" (150 mm) |
| TX1000 Transmitter: | |
| Frequency Response | 30 Hz - 18 kHz |
| Frequency Range | 510 MHz - 570 MHz |
| Transmit Mode | Micro Power Wireless |
| Channels | 100 Selectable RF Frequencies |
| Input Power | <10 mW |
| Signal-to-Noise Ratio | >85 dB |
| Harmonic Distortion | <0.5% |
| Frequency Error | <15 ppm |
| Frequency Stability | ≤±0.002% |
| Modulation Mode | FM |
| Working Current | 100 - 120 mA |
| Antenna | Sheltered Antenna |
| Audio Input | TA4M 4-Pin Mini-XLR Connector |
| Transmitter Controls | Power On/Off Volume Adjustment IR Synchronization Manual Frequency Selection Automatic Frequency Scanning Lock/Unlock Setting |
| Power Requirements | 2x 1.5V AA Batteries |
| Transmitter Battery Life | Approximately 12 Hours, Depending on Operating Conditions |
| Manufacturer Warranty | 2 Years |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.