- Description
Details
The Community ENTASYS ENT220 Compact Column Point Source Loudspeaker is an all-weather, column line array loudspeaker housed in an attractive, heavy duty extruded PVC enclosure. The largest member of the ENTASYS 200 family, the ENT220 provides exceptional directional control in the vertical axis to tame extremely difficult acoustic environments. With enough power to cover medium and large venues, a system of well-placed ENT220 columns is capable of providing intelligibility and superb musical reproduction, while barely being visible. Noisy environments, excessive reverberation, and other suboptimal acoustical conditions are handled effortlessly by the ENT220. Houses of worship, music venues and corporate AV presentations will benefit from the high performance and versatility of the ENT220.
At the top of the line is the ENT220 features twenty LF drivers to enhance low frequency pattern control, output and impact. The ENT220 LF extension is equal to many 12-inch loudspeakers while its output is equal or greater than most 15-inch 2-way box loudspeakers. Passive crossovers with unique dynamic protection circuitry provide flat frequency responses while guarding against abusive conditions without harming sonic quality.- Features
Features
- Advanced passive crossover technology
- Dynamic protection circuitry
- Compact Ribbon Emulator high frequency technology for narrow, well-behaved vertical directivity control
- All-weather construction for indoor/outdoor usage
- Selectable low impedance or 70V/100V operation
- Simple installation using the included pan-tilt mounting bracket
- Tightly controlled vertical dispersion reduces harmful room reflections
- Wide horizontal dispersion means fewer units cover a given area
- Clean, clear and powerful sonic output without the cost of bi-amplification
- Available in standard black or white finishes, may also be painted to match room décor
- Specification
Operating Range 80 Hz - 22 kHz (-10 dB) Frequency Response 130 Hz to 20 kHz (-3 dB) Max Input Ratings (8 ohm) 500W continuous, 1250W program 63 volts RMS, 126 volts momentary peak Autoformer Taps—70V 120W, 60W, 30W, 15W, 7.5W Autoformer Taps—100V 120W, 60W, 30W, 15W Sensitivity (1W/1m) 97dB (130 Hz - 20 kHz) full space Maximum Output 124 dB SPL / 130 dB SPL (peak) Nominal Impedance 8 ohms Minimum Impedance 5.6 ohms @ 320 Hz Vertical Coverage 15° (2 kHz - 16 kHz ±15°) @ 13m Horizontal Coverage 140° average (1 kHz - 10 kHz ±20°) Crossover Frequency 5000 Hz Recommended Signal Processing 80 Hz, 24 dB/Oct high pass filter Drivers LF 20 x 80mm long excursion mylar driver, HF 4 x 3-element Compact Ribbon Emulator Driver Protection Dynamic protection circuitry Input Connection NL4 Speakon-type connector for low impedance operation; and 8 -position terminal strip for low impedance or constant voltage operation Controls None Enclosure Extruded, high gloss paintable PVC Finish Black or white Grille Dual-layer powder coated steel, black or white finish Safety Features Built-in safety eyebolt Environmental Outdoor Direct Exposure Certified IP54W per IEC529 for UV, moisture and salt spray Required Accessories High pass filter Supplied Accessories Pan-tilt bracket accommodating zero to 9° down-tilt and +/- 55° panning; and ABS plastic rain cover with integrated cable inlet and 1" (25.4mm) knockout for conduit ingress Optional Accessories E200-UMK universal mounting kit, E200-SAK stand adapter kit Dimensions (H x W x D) 64.6" (1643 mm) x 4.62" (117 mm) x 7.47" (189 mm) Weight (without bracket) 41 lbs (18.6 kg) Shipping Weight 65 lbs (29.5 kg) - Documents
Documents
- Reviews
Write Your Own Review