Accessories
-
Audio-Technica ATUC-50IU Integration Unit
The Audio-Technica ATUC-50IU is microprocessor for custom designed flush mount conference units for the ATUC-50 system. It can be placed anywhere in same chain/loop with other ATUC-50 units, where the architecture of the system requires seamless, hidden installation of the microprocessor.
List $420.99Price $420.00 -
Yamaha PGX1 Paging Station Extension
The Yamaha PGX1 is a paging station extension that can be used with the PGM1.
-
Biamp Parlé N 100 Network Adapter and Port Expander
The Biamp Parlé N 100 is an easy-to-use network adapter and port expander designed for use with the Parlé ABC 2500/2500a, VBC 2500/2500a audio and video conferencing bars, as well as the Vidi 250 camera. The N 100 adds network connectivity and multiple USB ports. -
Yamaha MCP1 Wall-Mount Controller
The Yamaha MCP1 is an advanced wall-mount control panel for controlling MTX and MRX systems.
-
Shure Microflex MXCWNCS Networked Charging Station
The Shure MXCWNCS networked charging station charges 10 SB930 batteries in 4 hours.
-
Roland XS-42H Matrix Switcher
The Roland XS-42H is the switcher anyone can connect to and immediately start sharing information to one or two screens for effective meetings and huddles. It is easily installed without any AV experience turns any flat panel TV into a meeting room system.
-
Bosch PVA-4R24 PAVIRO Matrix Router
The Bosch PVA-4R24 24 Zone Router is a zone extension for the PAVIRO system. The PVA-4R24 adds 24 zones, 20 GPIs, 24 GPOs, and 2 control relays to the system and is controlled and supervised via the CAN bus by the PVA-4CR12 (Controller).List $2,171.00Price $1,875.74Savings $295.26 (14%) -
Yamaha Unified Communications RM-CR Remote Conference Processor
The Yamaha RM-CR signal processor is the heart of the RM series, it automatically recognizes connected devices on the same network for audio routing. -
Yamaha Unified Communications RM-WAP-8 Wireless Access Point for 8 ADECIA RM Series DECT Microphones
Use the Yamaha RM-WAP-8 PoE powered wireless access point to pair up to 8 RM series wireless microphones and chargers. -
Audio-Technica ATND8734a Power Module with Dante Network Output
The ATND8734a is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable.
List $549.99Price $549.00