Search results for 'Audio Enhancement SAFE'

The Aviom MT-1a attaches with three screws to the bottom of an A360 Personal Mixer, A320 Personal Mixer, A-16II Personal Mixer, or A-16CS Control Surface and mounts on any standard mic stand with the ring nuts supplied.

The Gator Cases G-MIXERBAG-0909 bag is 9" x 9" x 2.75" and can hold a mixer or general gear.

Provides power for the Bose ToneMatch audio engine when used with an L1 Compact or L1 Model I system, or for stand alone use. Power rating: AC 100–230V~.

The Yamaha RKMG12 Rackmount kit is designed for the MG12 and MG12XU mixing consoles. The two metal rack-mount supports are screwed onto both sides of the console to mount the unit into the rack.

The Yamaha M770 Mixer Stand Tripod stand with adapter is made to attach to MG102C, MG82CX, Stagepas 400i and Stagepas 600i.

The Gator Cases G-MIXERBAG-1306 padded mixer carrying bag measures 13.1" x 6.25" x 6".

To light your rack, the Atlas Sound AP-GNL18 is a 16" gooseneck LED lamp with XLR connection for use with ECS-6RM, ECS-3, and other models. LED lamps are far superior in terms of longevity, as well as heat reduction, when compared to traditional incandescent lamps. Additionally, the XLR base mounts are also superior to the commonly used BNC type base.

To light your rack, the Atlas Sound AP-GNL18 is a 16" gooseneck LED lamp with XLR connection for use with ECS-6RM, ECS-3, and other models. LED lamps are far superior in terms of longevity, as well as heat reduction, when compared to traditional incandescent lamps. Additionally, the XLR base mounts are also superior to the commonly used BNC type base.

The Gator Cases G-MIXERBAG-1815 bag is 18" x 15" x 6.5" and can hold a mixer or general gear.

Reliability has been the absolute cornerstone of Yamaha’s digital mixing console development, but there was always one component we knew would fail first; the lamp bulbs!

This Gator Cases G-MIXERBAG-2621 padded nylon carrying bag is designed for large format mixers up to 26" x 21" x 8.5".

This Gator Cases G-MIXERBAG-3121 padded nylon carrying bag is designed for large format mixers up to 31" x 21" x 7".

The Gator Cases G-MIXERBAG-3621 large format mixer carry bag measures 36" x 21" x 8".

The ART MX821S is a versatile rack mount mixer combining eight independent input channels into a stereo line-level output. Each input channel accepts a balanced XLR microphone input or unbalanced 1/4-inch TS line-level signal and provides independent level and pan controls.

The K&M 28075 is a heavy-duty, foldable stand for amplifiers and mixers, with a spring-loaded locking bolt and locking screw, and felt-lined supporting brackets.

The Gator Cases G-TOURX32NDH road case is custom made to fit the Behringer X32 mixing console.

With its instantly familiar analog mixer design, the PreSonus StudioLive AR8c is the easiest way to record podcasts, live streams, and music productions. Featuring a pristine analog front-end with four high-gain XMAX mic preamps and an 8x4 24-bit, 96 kHz, USB-C compatible USB 2.0 audio interface, the StudioLive AR8c’s hybrid design makes it simple to record from a single intuitive console.

The Gator Cases G-TOURM32RNDH road case is specially built to fit the Midas M32R.

Don't let the classic analog mixer design fool you—the Presonus StudioLive® AR12c was built to record. With a pristine analog front-end, eight high-gain XMAX mic preamps, and a 14x4 24-bit, 96 kHz, USB-C compatible USB 2.0 audio interface, its hybrid design makes it simple to record studio productions and mix live shows from a single, intuitive console.

The Yamaha NY64-D is an I/O expansion card for TF series consoles that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 48 kHz 24 bit digital audio data via a Dante™ audio network.

The Rane DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices.

The Gator Cases G-TOURPESL32IIINDH road case is specially built to fit the Presonus StudioLive 32 Series III digital mixer.