Search results for 'Williams Sound PPA'

The TOA SR-TB3 is a wall tilt bracket designed to install the line array speaker flat against the wall. The downward angle can be set to 0°- 5° and the horizontal angle to up to 15°.

The TOA HY-PF7B speaker rigging frame is used exclusively to suspend the HX-7 speaker system from a high ceiling indoors.

The Atlas Sound PB21X is an extendable microphone boom extending from 25-1/4" to 38-1/2" with a single motion and is suitable for a wide variety of miking applications. It contains a fixed 2 lb counterweight and threaded end cap. Finish is ebony.

The Atlas Sound PB21X is an extendable microphone boom extending from 25-1/4" to 38-1/2" with a single motion and is suitable for a wide variety of miking applications. It contains a fixed 2 lb counterweight and threaded end cap. Finish is chrome.

The all-steel On-Stage Stands SS7990 speaker wall mounts provide 180 degrees of steering, 80 lbs per mount capacity and comes complete with multiple tie points for tilting options, mounting hardware and instructions.

The TOA HY-CN1B speaker extension bracket is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction.

The TOA HY-CN1W speaker extension bracket is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range sound reproduction.

The On-Stange Stands SS7322B adjustable wall mount speaker bracket is ideal for sound contractors, mount this bracket on the walls at nightclubs, recording studios, home multi-media rooms, schools or just about anywhere! For mounting on flat surfaces, this adjustable bracket features a tilting angle adjustment.

The On Stage Stands SS7914B wall mount speaker bracket is ideal for sound contractors. Mount this bracket on walls at night clubs, recording studios, home multi-media rooms, schools or just about anywhere! With the included adapter sleeve, this wall mount makes for a universal fit: 1-3/8" - 1-1/2".

The Atlas Sound DMS7 adjustable height instrument microphone stand has extraordinary stability ratings, this low-height, adjustable microphone stand is ideal for professional miking of drum kits, percussion and string instruments and guitar/bass guitar amplifiers.

The Atlas Sound DMS10 adjustable height instrument microphone stand has extraordinary stability ratings, this low-height, adjustable microphone stand is ideal for professional miking of drum kits, percussion and string instruments and guitar/bass guitar amplifiers.

The Art DTI (Dual Transformer/Isolator) is a high quality totally passive audio interface that uses a pair of high-performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise.

The DBX dB12 Active Direct Box gives you more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and the mic'd sound

The Radial JPC is a stereo direct box that has been specifically designed for use with computer sound cards and other consumer electronic products to allow these to be connected to a professional sound system.

The Adaptive Technologies MM-022-BT universal MultiMount speaker mount supports loudspeakers weighing up to 60 lbs/27 kgs, quickly attaching them to walls, ceilings, overhangs, and other structural surfaces. - Speaker not included

The Whirlwind EDB1 Connect Series Direct Box is an imported economy direct box offering rugged construction while maintaining exceptional sound quality.