Search results for '"anchor audio AN-135+"'
-
Whirlwind SPLIT 6 Line Level Parallel Splitter
The Whirlwind SPLIT 6 Line Level Parallel Splitter features 1 female XLR input wired to 6 male XLR outputs. Use this handy box when you need to split a line level signal up to 6 times.
-
Whirlwind FP-1 Floor Pocket
Constructed of 11 gauge steel, the Whirlwind FP-1 permits flush installation for safe, reliable connections. Each unit incorporates a black carpet trim ring with a beveled edge.
-
Whirlwind FP-2 Floor Pocket
Constructed of 11 gauge steel, the Whirlwind FP-2 permits flush installation for safe, reliable connections. Each unit incorporates a black carpet trim ring with a beveled edge.
-
Whirlwind FP-3 Floor Pocket
Whirlwind FP-3 and FP-4 units feature removable bottom and end panel(s) to facilitate custom punching and engraving. (The FP-3 has one interchangeable panel on one end, the FP-4 provides panels on both ends.) -
Whirlwind FP-4 Floor Pocket
Whirlwind FP-3 and FP-4 units feature removable bottom and end panel(s) to facilitate custom punching and engraving. (The FP-3 has one interchangeable panel on one end, the FP-4 provides panels on both ends.) -
Whirlwind WP1/2MW Stainless Steel Mounting Wall Plate
The Whirlwind WP1/2MW Stainless Steel Mounting Wall Plate has 2 Whirlwind WC3M male XLRs.
-
Whirlwind WP1/2FW Stainless Steel Mounting Wall Plate
The Whirlwind WP1/2FW Stainless Steel Mounting Wall Plate is 2 Whirlwind WC3F female XLRs.
-
Whirlwind WP2/4FW Stainless Steel Wall Mounting Plate
The Whirlwind WP2/4FW Stainless Steel Wall Mounting Plate is a dual gang, 4 Whirlwind WC3F female XLRs wall plate.
-
Whirlwind SP1X2 1x2 Microphone Splitter
The Whirlwind SP1X2 provides one input and one isolated output from a mic level input. Each transformer isolated output on these devices features a ground lift switch. -
Whirlwind SP1X3 1x3 Microphone Splitter
The Whirlwind SP1X3 provides one direct and two isolated outputs. Each transformer isolated output on these devices features a ground lift switch.
-
Whirlwind CC-PLD-08 8RU 22.5 x 30 Cyclone Rack Case with Lift-Off Doors
The Whirlwind CC-PLD-08 is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-10 10RU 22.5 x 30 Cyclone Rack Case with Lift-Off Doors
The Whirlwind CC-PLD-10 is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-12 12RU 22.5 x 30 Cyclone Rack Case with Lift-Off Doors
The Whirlwind CC-PLD-12 is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-14 14RU 22.5 x 30 Cyclone Rack Case with Lift-Off Doors
The Whirlwind CC-PLD-14 is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-16 16RU 22.5 x 30 Cyclone Rack Case with Lift-Off Doors
The Whirlwind CC-PLD-16 is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-18 18RU 22.5 x 30 Cyclone Rack Case with Lift-Off Doors
The Whirlwind CC-PLD-18 is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-10P 10RU 24 x 30 Cyclone Rack Case with Pocket Doors
The Whirlwind CC-PLD-10P is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-12P 12RU 24 x 30 Cyclone Rack Case with Pocket Doors
The Whirlwind CC-PLD-12P is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-14P 14RU 24 x 30 Cyclone Rack Case with Pocket Doors
The Whirlwind CC-PLD-14P is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-20 20RU 22.5 x 30 Cyclone Rack Case with Lift-Off Doors
The Whirlwind CC-PLD-20 is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-18P 18RU 24 x 30 Cyclone Rack Case with Pocket Doors
The Whirlwind CC-PLD-18P is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-16P 16RU 24 x 30 Cyclone Rack Case with Pocket Doors
The Whirlwind CC-PLD-16P is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind CC-PLD-20P 20RU 24 x 30 Cyclone Rack Case with Pocket Doors
The Whirlwind CC-PLD-20P is made up of the finest Colson® casters, flush-mounted MOLTM latches, and is built around the Marine grade HDPE panels resulting in a roadworthy, incredibly sturdy road case that won't soak up water and rot like traditional cases that are made with plywood.
-
Whirlwind pcDI Dual Channel Direct Box
The Whirlwind pcDI is perfect for interfacing the outputs of CD players, computer sound cards, iPODs® / MP3 players, tape decks, etc. with professional, balanced, low impedance equipment.