Commercial Sound Equipment

The Octasound RAMX2 remote audio mixer is an easy to operate 2 channel mixer for any sound system. Simply plug in a Microphone, MP3 Player, Laptop, Ipod or CD player, and turn up the volume! It can be placed anywhere in a facility, fitting into a standard single gang electrical box.

The Samson Concert 288 All-In-One Dual Channel Wireless System takes the worry out of wireless by offering easy setup, flawless operation and premium sound.

The RDL RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Each output provides either a microphone or line level signal.

With a quick, easy setup and simple intuitive operation, it's never been easier to bring your commercial space to life than with Yamaha's newest addition, the MA2030a compact mixer power amplifier.

The Atlas Sound CP400 dual channel power amplifier is a professional grade audio power amplifier specifically designed for demanding contractor applications. The CP400 features esoteric grade toroidal power supply and output transformers.

The Atlas Sound CP700 High Performance Power Amplifier is a professional grade audio power amplifier specifically designed for demanding contractor applications, the CP700 features esoteric grade toroidal power supply and output transformers.

The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.

The TOA D-922F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The American Audio WM-219 is a 2-channel UHF wireless microphone system that includes two wireless microphones, two different color-coded rings (to differentiate each microphone) and a wireless receiver with individual volume control and audio input for each microphone.

The TOA D-921F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.

The Samson Concert 288 Handheld wireless system offers easy setup, flawless operation and premium sound, ideal for vocal performances, presentations, educational applications and more where two users are needed.

The Listen Tech LA-466 Dante 2-channel output XLR adapter lets you drive analog line-level products from any Dante-connected network.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The Whirlwind DA-2 drives multiple isolated line feeds from a single input source. It is ideal for driving lines to multiple amps in live sound applications, distributing audio to multiple tape decks, feeding signals to multiple zoned locations, etc.

This QSC ISA280 2 Channel Power Amplifier includes a selectable high-pass filters to protect speakers and prevent speaker transformer saturation with minimal effect on program material. The ISA Series provide additional protection circuitry including DC, infrasonic, thermal overload, RF and short circuit protection.

The TOA DA-250DH is a 2 Channel Digital Power Amplifier designed for 70 V line high-impedance distribution and features lightweight, compact, high power output, and high efficiency.

This QSC ISA750 amplifier includes a selectable high-pass filter to protect speakers and prevent speaker transformer saturation with minimal effect on program material. The ISA Series provide additional protection circuitry.

The Ashly CA-1.52 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The Ashly CA-502 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The Ashly CA-1.02 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The Ashly CA-1.52 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. The Ashly nX4002 is a 2 channel multi-mode amplifier capable of driving 2 ohm loads at full power.