Commercial Sound Equipment

The JBL CST2120 is a transformer module which provides impedance and voltage matching for the CSA2120 amplifier.

The Rolls PA202 is a compact class D amplifier. It has 20W per channel stereo @ 4 Ohms and 40W when in bridge/mono mode @ 8 Ohms. The class D low heat design gives this amplifier the ability to be mounted in very tight applications.

The RDL ST MX2 2 Channel Audio Mixer is used in any application requiring mixing of two audio sources. A mic may be mixed with a line-level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier.

The Atlas Sound AA-PPRC Priority Paging Remote Controller is a two input by two output speaker level relay switcher. The AA-PPRC is designed to be placed between an amplifier's output and the speaker load. It can be used with 25V, 70.7V, 100V or low impedance systems.

The PA2030a Power Amplifier features an interface that has been specifically designed for effortless operation.

The Samson Concert 288 All-In-One Dual Channel Wireless System takes the worry out of wireless by offering easy setup, flawless operation and premium sound.

The RDL RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Each output provides either a microphone or line level signal.

The JBL CSA240Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.

With a quick, easy setup and simple intuitive operation, it's never been easier to bring your commercial space to life than with Yamaha's newest addition, the MA2030a compact mixer power amplifier.

The JBL CSA2120 provides accurate, uncolored sound with low distortion for both audio and voice applications.

The JBL CSA280Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.

The Yamaha PA2120 is easy to setup and features a user-friendly interface for effortless operation. Remote volume control and microphone on/off switching via optional DCP control panels (DCP4V4S, DCP1V4S, DCP4S, max 2 units).

The Atlas Sound CP400 dual channel power amplifier is a professional grade audio power amplifier specifically designed for demanding contractor applications. The CP400 features esoteric grade toroidal power supply and output transformers.

Optimized for commercial applications, the Bose FreeSpace IZA amplifiers feature selectable Loudspeaker EQ to enrich audio quality, Opti-voice paging for clear speech intelligibility while providing seamless transitions.

The Atlas Sound CP700 High Performance Power Amplifier is a professional grade audio power amplifier specifically designed for demanding contractor applications, the CP700 features esoteric grade toroidal power supply and output transformers.

The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.

The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.

The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.

The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Atlas Sound HPA2602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70 V / 100 V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

The Atlas Sound HPA4202 Dual Channel Commercial Amplifier features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante 2-channel digital audio interface.

The Crown CDi 4000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.