Commercial Sound Equipment

The Biamp Tesira AMP-450BP is a 4-Channel PoE+ conferencing amplifier. Capable of mounting directly to the back of the speaker, this amplifier greatly reduces cost by minimizing the cabling between the ceiling devices and the rack room.

The Audix DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone.

The QSC SPA4-60 is a powerful yet affordable amplifier designed to meet the audio amplification needs of boardrooms, conference rooms, and other corporate spaces where multiple speakers are in use.

The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.

Specifying the right power amp is often easier than finding it. The SRA-4075 makes it a snap to get exactly what you need. SRAs are advanced, efficient amplifiers perfect for installations with modest power requirements. Housed in a compact single rack space chassis, and weighing only 10lbs, they're designed to drive 4 or 8 Ohm loads.

The Ashly FA-250.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.

The ART HVA4 is a class-D installation amplifier suitable for both 70/100V line installations (selectable through dip-switches). Each channel has its own gain control and LED indicators (signal, clip and protection). The input and output connections are made through Euroblock connectors. The amplifier is a 1U 19" wide rack and is appropriate for many types of installations, taking advantage of its multichannel design.

The Atlas Sound IED1544BAS is a backup amplifier switching module capable of switching up to four (4) speaker loads from a primary power amplifier to a backup when a failure is detected.

The Ashly nX 754 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Ashly nX 1504 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The AtlasIED Atmosphere AZA404 four-channel 400W amplifier is designed to interface with the Atmosphere family of products, such as the AZM series of processors. The AZA amplifiers can be configured in pairs to deliver up to 100W per channel into both low and high impedance speaker loads (4Ω/8Ω/70V/100V).

The TSDBB44 BlueBridge's compact design can be used as a standalone device to run a sophisticated sound system or as a supplement to an existing system.

The QSC MP-M40 music and paging mixer offers unprecedented capabilities for processing and routing high-quality audio for background and foreground music as well as live mixing functionality combined with ease of configuration and operation.