Commercial Sound Equipment

The JBL CSMA 240 is an 8 channel mixer/amplifier, a professional tool with a sleek industrial look that is designed and built for commercial sound applications.

The JBL CSMA 280 is an 8 channel mixer/amplifier, a professional tool with a sleek industrial look that is designed and built for commercial sound applications.

The JBL CSMA 2120 is an 8 channel mixer/amplifier, a professional tool with a sleek industrial look that is designed and built for commercial sound applications.

The Shure SCM810 8 channel automatic mixer features the Shure patented IntelliMix, which activates only microphones being addressed, minimizing poor audio caused by multiple open microphones.

The TOA M-900MK2 Mixer Pre-amplifier is engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation.

The Ashly FR-8 8-channel DSP network remote fader is a great choice for facilities that use amateur operators for occasional live performances. Mix and match network remotes in a single installation via a standard Cat-5 cable.

The TOA M-9000M2 new integrated operating mode provides powerful functionality for both simple mixing and complex multi-zone paging applications.

The Shure SCM800 Microphone Mixer is a full-featured, eight-channel microphone mixer for sound reinforcement, general audio recording, and audio-visual systems.

The TOA A-9120DHM2 Modular Digital Matrix Mixer Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer.

This Apart Audio 8-channel bridgeable power amplifier is probably the most versatile class-D amplifier in the range. Combined with a pre-amplifier or matrix the REVAMP8250 can be used to create 8 zones in mono, 4 zones in stereo, even 4 bridged mono or 2 bridged stereo systems can be created.

The QSC MP-M80 music and paging mixer offers unprecedented capabilities for processing and routing high-quality audio for background and foreground music as well as live mixing functionality combined with ease of configuration and operation.

Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.

Complimentary to Ashly's amplifiers, the Ashly ne8800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.

The Shure SCM820-DAN is an 8-channel digital automatic mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.

The Listen Tech LW-200P-08 is an 8-channel streaming solution that allows users to use their smartphone for assistive listening. This affordable and reliable way to meet ADA and IBC assistive listening requirements can service audiences of up to 1000 users.

The QSC MP-A80V 8-channel music and paging amplifier features FlexAmp Technology, which is the driving force behind the amplifier. The MP-A80V offers an incredible 1600W with four sets of channels pairs, each channel pair shares 400W.

The AtlasIED high power amplifier, "HPA" Series, is designed for use in either commercial 25V / 70V / 100V distributed systems or low impedance 8 or 4 ohm applications that require amplifiers to handle multiple impedance loads.

This Ashly Audio ne8250 eight-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.