Commercial Sound Equipment

The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.

The AtasIED IPCSD1 is a push-to-talk switch only digital microphone station designed to work within a GLOBALCOM®.IP system. It is a network appliance with a unique IP address that requires no configuration. It uses a single Ethernet interface for audio and control data.

The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.

The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.

The AtlasIED IPCSD4 digital microphone station is a 4-button device for initiating audio/visual announcements, messages, and pages with the GLOBALCOM®.IP IP108-D or IP116-D Announcement Control Systems. The IPCSD4 uses a single Ethernet interface for audio and control data.

The Atlas Sound IPUSBD-8 is a Dante™ network audio device providing 8x8 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB via redundant RJ-45 ports.

This Listen Tech LCS-120-01 combines Wi-Fi and RF technology products to provide compliant audio coverage PLUS expanded coverage to everyone with a Smartphone or tablet.

The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The nXp 752 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Atlas Sound IPUSBD-16 is a Dante™ network audio device that provides 16x16 input/output channels of digital audio to/from a USB port of a host computer to Ethernet.

The Listen Tech LCS-121-01 combines Wi-Fi and RF technologies to give compliant audio coverage PLUS expanded coverage to everyone with a Smartphone or tablet.

The Listen Tech LCS-120-01-D combines Wi-Fi and RF technologies to provide compliant audio coverage PLUS  expanded coverage to everyone with a Smartphone or tablet. The System comes with Dante multi-channel digital media networking capabilities.

The nXp 1502 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The nXe 754 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The Listen Tech LCS-122-01 combines Wi-Fi and IR technologies to give compliant audio coverage PLUS expanded audio coverage to everyone with a Smartphone or tablet.

The nXe 1504 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The nXp 754 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.