Commercial Sound Equipment
Commercial Audio Products and Accessories
We carry a huge selection of commercial audio’s bestselling brands and products including, Bose Commercial, JBL Commercial, Yamaha Commercial Audio, Atlas Sound, AtlasIED, Electro-Voice Electro-Voice EV, TOA Electronics, QSC Audio, Bosch, Pure Resonance Audio, Bogen Communications, Ashly Audio, Community Loudspeakers, Biamp, Cambridge Sound Management, Soundtube, Denon Commercial, Tascam, Tannoy, Lowell, Quam, MiPro, CAD Audio, RDL Radio Design Labs, Speco, Peavey Commercial Audio, West Penn Wire and Cable and many more.
Designing a new system, upgrading or repairing your system we can help. Select from the bestselling products for your commercial audio project or system design including, PA paging horns, indoor-outdoor speakers, IP speakers, amplifiers, mixers, mixer amps, electronics, intercoms, assistive listening devices, volume controls, microphones, equipment racks, soundproofing, intercom-headsets, wiring, patch cables, mounting brackets, parts and installation accessories.
These products are made to run 24/7 365 and built to last in any challenging environment or commercial audio application. When reliability and performance are critical - such as in PA paging, background music, announcements, emergency alert, 70V audio systems, and indoor and outdoor industrial and public address systems.
Need Quantity Pricing?
We provide special discounts for contractors & installers, institutional buyers, schools, government, and military buyers on all brands, products, parts, and accessories. We accept purchase orders from schools and universities, as well as government and military organizations.
We specialize in commercial audio 70V products and system design. Get help fast, chat, email, or call our sales engineers at (888) 256-4112. Select and buy the best commercial audio brands and products for your application, needs, and budget.
Talk To An Audio Engineer
Choosing Commercial Audio Equipment
Most people feel overwhelmed when choosing audio products or systems. Don’t worry. With over 100 years of collective audio design experience, we’ve got you covered.
1. Select Commercial Product or System
Choose the bestselling product from the list below that you feel will best meet your commercial audio needs. Don’t worry, this is just a starting point.
2. Customize with a Sales Engineer
One of our Sales Engineers will guide you in finalizing a product selection that is tailored to your application and budget.
3. Purchase the Right Equipment for You
Feel confident knowing that the product or system you have purchased is designed by a qualified audio engineer and will work - exactly the way you need it.
Shop with Confidence
Our committed, experienced professional sales engineers deliver reliable designs and provide lifetime tech support for all products.
-
Crown CDi 1000 Power Amplifier 2-Channel 500W @ 4Ω, 70V/140V Commercial Installation Amplifier
The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.
-
TOA DA-250FH 4-Channel Digital Power Amplifier
The TOA DA-250FH power amplifier utilizes advanced digital technology to provide multi-channel high power outputs. Featuring high efficiency amplifier topology, the high impedance version DA-250FH is ideal for various installed sound applications.
-
Crown CDi 2000 Power Amplifier Two-Channel 800 Watts @ 2Ω, 4Ω, 8Ω and 70V/140V Commercial Installation Amplifier
The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.
-
JBL Control 226C/T 6.5 inch Coaxial Ceiling Loudspeaker - Pair
The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in-ceiling mount applications. -
Dynacord C1300FDI DSP Power Amplifier 1 x 600W @ 70V Bridged with FIR Drive Technology
The Dynacord C1300FDI DSP power amplifier offers high-quality components and truly professional processing power and performance characteristics. Their engineering and applied technologies enable exceptional sound quality with plenty of headroom. The onboard DSP includes multi-band PEQs, crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group.
-
Atlas Sound HPA602 Dual Channel 600W Commercial Amplifier
The Atlas Sound HPA602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70V / 100V distributed systems and professional applications that require amplifiers to handle multiple impedance loads
-
Dynacord C1800FDI DSP Power Amplifier 2 x 1250W at 70V with FIR Drive Technology
The Dynacord C1800FDI DSP power amplifier offers high-quality components and truly professional processing power and performance characteristics. Their engineering and applied technologies enable exceptional sound quality with plenty of headroom. The onboard DSP includes multi-band PEQs, crossovers, limiters, and delay per channel. It also has true channel grouping control with extra DSP capabilities like PEQ, GEQ (graphic equalizer), and delay for each group.
-
Biamp Voltera A 600.2 Compact 600W 2-Channel Half-Rack Power Amplifier
The Biamp Voltera A 600.2 is a compact two-channel half-rack power amplifier with a total output power of 600 watts. The amplifier channels can be individually selected to drive 300 watts per channel into 4 ohm, 8 ohm, 70V, or 100V. Power sharing is also supported, allowing up to 600 watts to be delivered by any channel. -
Atlas Sound DPA602 600W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.
-
Atlas Sound Atmosphere AZA804 Networkable 4-Channel Amplifier 4 x 200 Watts with 70V/100V or 4Ω/8Ω Outputs
The AtlasIED Atmosphere AZA804 four-channel 800W amplifier is designed to interface with the Atmosphere family of products, such as the AZM series of processors. The AZA amplifiers can be configured in pairs to deliver up to 200W per channel into both low and high impedance speaker loads (4Ω/8Ω/70V/100V). -
QSC ISA800Ti 2 Channel Power Amplifier
The QSC ISA800Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA800Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Biamp Voltera A 600.4 Compact 600W 4-Channel Half-Rack Power Amplifier
The Biamp Voltera A 600.4 is a compact four-channel half-rack power amplifier with a total output power of 600 watts. The amplifier channels can be individually selected to drive 150W per channel into 4 ohm, 8 ohm, 70V, or 100V. Power sharing is also supported, allowing 300 watts to be delivered by any channel. -
Ashly Audio nX4002 2-Channel Multi-Mode Power Amplifier
The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. The Ashly nX4002 is a 2 channel multi-mode amplifier capable of driving 2 ohm loads at full power.
-
Ashly Audio nX4004 4-Channel Multi-Mode Power Amplifier
The Ashly nX4004 4-Channel 400W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Electro-Voice CPS 4.10 1000W 4-Channel Rack Mount Amplifier
The Electro-Voice CPS 4.10 is a 4-channel CPS amplifier featuring groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19" racks. Each channel individually provides transformerless, switchable output characteristics, which enable specific channels to achieve maximum drive.
-
Electro-Voice CPS 8.5 500W 8-Channel Rack Mount Power Amplifier
The Electro-Voice CPS 8.5 amplifier offers eight independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 500 watts into Low-Z or High-Z loads.
-
Atlas Sound DNA2404CL 70.7V CobraNet 4-Channel Network Audio Amplifier
The AtlasIED DNA2404CL amplifier is an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features CobraNet® digital audio input and four channels of 600W amplification.
-
Atlas Sound DNA2404CH 100V CobraNet 4-Channel Network Audio Amplifier
The AtlasIED DNA2404CH amplifier is an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features CobraNet® digital audio input and four channels of 600W amplification.
-
Atlas Sound DNA2404DL 70.7V Dante 4-Channel Network Audio Amplifier
The AtlasIED DNA2404DL amplifier is an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features Audinate's Dante digital audio input and four channels of 600W amplification.
-
Crown DCi 8|600 DriveCore Install 8-Channel 8 x 600W at 70V Power Amplifier
The Crown DCi 8|600 amplifier is designed, engineered and manufactured to the industry’s highest quality standards, and provides system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.
-
Crest Audio CKd 604 625W 4-Channel High Power Amplifier
The Crest CKd 604 provides 625 watts per channel in four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.
Commercial Audio Products and Accessories
We carry a huge selection of commercial audio’s bestselling brands and products including, Bose Commercial, JBL Commercial, Yamaha Commercial Audio, Atlas Sound, AtlasIED, Electro-Voice Electro-Voice EV, TOA Electronics, QSC Audio, Bosch, Pure Resonance Audio, Bogen Communications, Ashly Audio, Community Loudspeakers, Biamp, Cambridge Sound Management, Soundtube, Denon Commercial, Tascam, Tannoy, Lowell, Quam, MiPro, CAD Audio, RDL Radio Design Labs, Speco, Peavey Commercial Audio, West Penn Wire and Cable and many more.
Designing a new system, upgrading or repairing your system we can help. Select from the bestselling products for your commercial audio project or system design including, PA paging horns, indoor-outdoor speakers, IP speakers, amplifiers, mixers, mixer amps, electronics, intercoms, assistive listening devices, volume controls, microphones, equipment racks, soundproofing, intercom-headsets, wiring, patch cables, mounting brackets, parts and installation accessories.
These products are made to run 24/7 365 and built to last in any challenging environment or commercial audio application. When reliability and performance are critical - such as in PA paging, background music, announcements, emergency alert, 70V audio systems, and indoor and outdoor industrial and public address systems.
Need Quantity Pricing?
We provide special discounts for contractors & installers, institutional buyers, schools, government, and military buyers on all brands, products, parts, and accessories. We accept purchase orders from schools and universities, as well as government and military organizations.
We specialize in commercial audio 70V products and system design. Get help fast, chat, email, or call our sales engineers at (888) 256-4112. Select and buy the best commercial audio brands and products for your application, needs, and budget.