Commercial Sound Equipment

Systems built around the SWR2100P-5G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.

The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The ATND8734a is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable.

The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

Systems built around the SWR2100P-10G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.

The SoundTube STNet Hub 2 DSP amplifier gives designers and installers an IP-based option for traditional 70V/100V distributed audio systems in small to midsize applications.

This SoundTube IPD-RS62-EZ Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency.

This SoundTube IPD-RS62-EZ Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency.

The ATND933aWH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. It is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

The ATND933aWC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its low profile and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages.

The Audio-Technica ATND931aWH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. The small-diameter gooseneck design permits highly flexible positioning while maintaining a smooth, well-contoured appearance.

The Audio-Technica ATND931aWC is a wide-range miniature condenser microphone with a cardioid polar pattern designed for quality sound reinforcement. The combination of small size and excellent response makes the microphone ideal for boardrooms, school and government settings, teleconferencing, houses of worship and other installed applications.

The ATND931aH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. The small-diameter gooseneck design permits highly flexible positioning while maintaining a smooth, well-contoured appearance.

The ATND933aC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its low profile and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages.

The ATND933aH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. It is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.

The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

The SoundTube IPD-SM82-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.

The SoundTube IPD-SM82-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.

The Audix M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.

The SoundTube IPD-SM500i-II is a 5.25", 2-way surface-mount speaker for IP-addressable audio networks on the Dante platform. It incorporates a 5.25" polypropylene woofer and 1" convex titanium tweeter with waveguide in an injection-molded, glass fiber reinforced ABS enclosure.