Commercial Sound Equipment

The TOA T-12S is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a balanced line output, as well as an input that can control muting operations of a signal output.

The TOA PJ-304 is a projection speaker designed for ceiling and wall installations. Considered in architectural design, it can blend in with lighting equipment.

TOA CS-304U Wide Range Paging Speaker - The CS Series wide range paging speakers are ideal for indoor and outdoor commercial sound system applications for voice paging, background music and tone signaling distribution.

The TOA BS-1030 Music and Paging Speaker is a small, 2-way bass-reflex type speaker featuring a wide frequency range suitable for use for announcements and music playback. It can be used for both high-impedance and low-impedance applications.

The TOA PC-5CL cleanroom and splash-resistant speaker is ideal for dust-sensitive manufacturing plant, laboratories, hospitals, testing facilities with "cleanroom type" environmental requirements. 3.5" full-range cone driver 2.5 W tap. Dust Particle Prevention - No dust particle is produced by the method set out in JIS B-9926.

The TOA 9000 series digital mixer/amplifiers consists of two mixer/amplifier models (A-9060D and A-9120D) a mixer-only version, (M-9000) and four accessory modules, for which all models feature eight module ports allowing designers to configure custom systems.

TOA's PM-660U is an elegantly styled, compact desk microphone for use in public address, paging and radio communication systems. For BGM (background music), paging and music ducking applications, the PM-660U works with most commercial mixer amplifiers and allows your background music to subtly taper into a low level of sound while making an announcement or to page customers and staff. When your announcement is finished, the music will slowly return to its previously set volume.

The TOA F-2322 is a flush-mounted ceiling speaker that offer wide frequency range and high quality sound output to match a wide range of applications and installation locations.

The TOA CA-130 mobile mixer amplifier is ideal for remote applications requiring a compact and powerful mixer/amplifier for public address or emergency paging. It is powered with a standard 12 Volt DC battery and operate into four or eight ohm speaker loads. The CA-130 includes two microphone inputs with individual volume controls.

The TOA GS-302 garden speaker is a compact speaker that is ideal for applications such as paging and background music broadcasting in various locations such as gardens, theme parks, resort facilities and others. It features corrosion-resistant material and inconspicuous design to disappear into surroundings.

The TOA D-922E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The TOA D-922F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The TOA D-001R Line Input Module is a plug-in module designed for use with the 9000 Series. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

The TOA D-001T Dual Line Input Module is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60 dB to -10 dB.

TOA's HY-60D series brackets are used to change the directivity angle mode of the HX-7 Series Speaker System to 60° mode. Three pieces of the HY-60D Series are required to obtain 60° mode of directivity angle.